← Pennsylvania

Tap water quality report

Indian Creek Valley Water Auth

EPA monitoring tested this supplier for 110 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

110
contaminants tested
18
detected
7,000
people served
0
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Fayette

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
2,334
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2025-05-01 → 2025-07-31
MR Monitoring Resolved 2025-05-01 → 2025-07-31
MR Monitoring Resolved 2025-05-01 → 2025-07-31
MR Monitoring Resolved 2024-08-01 → 2024-10-31
MR Monitoring Resolved 2024-08-01 → 2024-10-31
MR Monitoring Resolved 2024-08-01 → 2024-10-31
MR Monitoring Resolved 2024-01-01 → 2024-12-31
MR Monitoring Resolved 2024-01-01 → 2024-12-31
MR Monitoring Resolved 2024-01-01 → 2024-12-31
MR Monitoring Resolved 2024-01-01 → 2024-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1214 µg/L 12%
of the EPA limit 10000 µg/L
worst single sample: 1420 µg/L
68/74 SYR4 2012–2019
Copper
1277.78 µg/L 98%
of the EPA limit 1300 µg/L
worst single sample: 1989.2 µg/L
66/66 SYR4 2013–2019
Chloroform
16.8 µg/L
No EPA limit set
worst single sample: 25.6 µg/L
51/51 SYR4 2012–2019
TTHM
23.965 µg/L 30%
of the EPA limit 80 µg/L
worst single sample: 35.4 µg/L
50/51 SYR4 2012–2019
Bromodichloromethane
6.6 µg/L
No EPA limit set
worst single sample: 32 µg/L
41/51 SYR4 2012–2019
Dibromochloromethane
1.9 µg/L
No EPA limit set
worst single sample: 2 µg/L
21/51 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
18.2 µg/L 30%
of the EPA limit 60 µg/L
worst single sample: 20.6 µg/L
21/51 SYR4 2012–2019
Barium
240.95 µg/L 12%
of the EPA limit 2000 µg/L
worst single sample: 290 µg/L
19/19 SYR4 2012–2019
Lead
17.66 µg/L 118%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 21.4 µg/L
18/66 SYR4 2013–2019
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
13/13 LCR 2025
Dichloroacetic Acid
5.045 µg/L
No EPA limit set
worst single sample: 5.1 µg/L
12/12 SYR4 2018–2019
Trichloroacetic Acid
2.9 µg/L
No EPA limit set
7/12 SYR4 2018–2019
Lithium
13.2 µg/L
No EPA limit set
4/16 UCMR-5 2025
Monochloroacetic Acid
6.916 µg/L
No EPA limit set
worst single sample: 7.2 µg/L
3/12 SYR4 2018–2019
Antimony, Total
2 µg/L 33%
of the EPA limit 6 µg/L
2/19 SYR4 2012–2019
Chromium
3.775 µg/L 3.8%
of the EPA limit 100 µg/L
worst single sample: 3.9 µg/L
2/19 SYR4 2012–2019
Bromoform
3.1 µg/L
No EPA limit set
1/51 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
3.7 µg/L 62%
of the EPA limit 6 µg/L
1/46 SYR4 2012–2019
92 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,3,7,8-TCDD2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
KERRY WITT
Phone
724-455-2905

Frequently asked questions about Indian Creek Valley Water Auth

Is Indian Creek Valley Water Auth tap water safe to drink?

EPA monitoring detected 18 contaminants in Indian Creek Valley Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Indian Creek Valley Water Auth's water?

EPA monitoring detected Nitrate, Copper, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Indian Creek Valley Water Auth serve?

Indian Creek Valley Water Auth reports serving 7,000 people in Pennsylvania, per its EPA record.

Has Indian Creek Valley Water Auth had any water quality violations?

The EPA has 2334 violations on file for Indian Creek Valley Water Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.