Tap WaterIndex

← Pennsylvania

Tap water quality report

Midland Boro Muni Auth

EPA monitoring tested this supplier for 79 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
19
detected
3,100
people served
159
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Surface water
Ownership
Local government
Counties served
Beaver

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

159
health-based violations
926
violations on file
1
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2024-04-01 → 2024-06-30
MCL Health-based Resolved 2024-04-01 → 2024-06-30
MCL Health-based Resolved 2024-04-01 → 2024-06-30
MCL Health-based Resolved 2024-04-01 → 2024-06-30
MCL Health-based Resolved 2024-01-01 → 2024-03-31
MCL Health-based Resolved 2024-01-01 → 2024-03-31
MCL Health-based Resolved 2024-01-01 → 2024-03-31
MCL Health-based Resolved 2024-01-01 → 2024-03-31
MCL Health-based Resolved 2023-10-01 → 2023-12-31
MCL Health-based Resolved 2023-10-01 → 2023-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
134.5 µg/L 168%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 155.5 µg/L
32/32 SYR4 2012–2019
Bromodichloromethane
39.05 µg/L
No EPA limit set
worst single sample: 44 µg/L
31/31 SYR4 2012–2019
Chloroform
84.35 µg/L
No EPA limit set
worst single sample: 91 µg/L
31/31 SYR4 2012–2019
Dibromochloromethane
22.5 µg/L
No EPA limit set
worst single sample: 43.6 µg/L
31/31 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
72.65 µg/L 121%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 92.4 µg/L
31/32 SYR4 2012–2019
Copper
634.45 µg/L 49%
of the EPA limit 1300 µg/L
worst single sample: 1400 µg/L
30/30 SYR4 2013–2019
Lead
7.7 µg/L 51%
of the EPA limit 15 µg/L
worst single sample: 8 µg/L
21/30 SYR4 2013–2019
Nitrate
1700 µg/L 17%
of the EPA limit 10000 µg/L
 12/12 SYR4 2012–2019
Bromoform
6.645 µg/L
No EPA limit set
worst single sample: 9.89 µg/L
11/32 SYR4 2012–2019
Barium
41.85 µg/L 2.1%
of the EPA limit 2000 µg/L
worst single sample: 43.5 µg/L
7/7 SYR4 2012–2019
Dalapon
1.624 µg/L 0.8%
of the EPA limit 200 µg/L
worst single sample: 1.67 µg/L
5/10 SYR4 2014–2019
Dibromoacetic Acid
1200.4 µg/L
No EPA limit set
worst single sample: 1500 µg/L
5/6 SYR4 2018–2019
Dichloroacetic Acid
23.76 µg/L
No EPA limit set
worst single sample: 24.7 µg/L
5/5 SYR4 2018–2019
Trichloroacetic Acid
39.28 µg/L
No EPA limit set
worst single sample: 44.1 µg/L
5/5 SYR4 2018–2019
Lead
0.0030 mg/L 20%
of the EPA limit 0.0150 mg/L
 4/4 LCR 1998
Monobromoacetic Acid
2125.42 µg/L
No EPA limit set
worst single sample: 2500 µg/L
4/6 SYR4 2018–2019
Monochloroacetic Acid
1955.37 µg/L
No EPA limit set
worst single sample: 2300 µg/L
4/6 SYR4 2018–2019
Dichloromethane
0.7580 µg/L 15%
of the EPA limit 5 µg/L
 1/10 SYR4 2012–2019
Toluene
0.7940 µg/L 0.1%
of the EPA limit 1000 µg/L
 1/10 SYR4 2012–2019
60 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JOHN NOTO
Phone
724-643-4920

Frequently asked questions about Midland Boro Muni Auth

Is Midland Boro Muni Auth tap water safe to drink?

EPA monitoring detected 19 contaminants in Midland Boro Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Midland Boro Muni Auth's water?

EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Dibromochloromethane, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Midland Boro Muni Auth serve?

Midland Boro Muni Auth reports serving 3,100 people in Pennsylvania, per its EPA record.

Has Midland Boro Muni Auth had any water quality violations?

The EPA has 926 violations on file for Midland Boro Muni Auth, of which 159 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.