Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2025-08-01 |
| RPT | Monitoring | Resolved | 2025-08-01 |
| RPT | Monitoring | Resolved | 2025-08-01 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MR | Monitoring | Resolved | 2024-10-01 → 2024-12-31 |
| MON | Monitoring | Resolved | 2024-02-01 → 2024-02-29 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 6935.5 µg/L 69% of the EPA limit 10000 µg/L
worst single sample: 7480 µg/L | 68/68 | SYR4 | 2012–2019 |
| Copper | 285.05 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 608 µg/L | 60/60 | SYR4 | 2013–2019 |
| Lead | 33.06 µg/L 220% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 89 µg/L | 29/60 | SYR4 | 2013–2019 |
| Lead | 0.0026 mg/L 17% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2025 |
| Bromoform | 4324 µg/L No EPA limit set
worst single sample: 7200 µg/L | 9/9 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3001.99 µg/L No EPA limit set
worst single sample: 5000 µg/L | 9/9 | SYR4 | 2012–2019 |
| TTHM | 15.48 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 16 µg/L | 9/9 | SYR4 | 2012–2019 |
| Bromodichloromethane | 900.375 µg/L No EPA limit set
worst single sample: 1200 µg/L | 6/9 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 4.096 µg/L 6.8% of the EPA limit 60 µg/L
worst single sample: 4.12 µg/L | 5/9 | SYR4 | 2012–2019 |
| Barium | 131.41 µg/L 6.6% of the EPA limit 2000 µg/L
worst single sample: 135 µg/L | 3/3 | SYR4 | 2012–2018 |
| Tetrachloroethylene | 0.8690 µg/L 17% of the EPA limit 5 µg/L
worst single sample: 0.9000 µg/L | 3/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2850.15 µg/L No EPA limit set
worst single sample: 3000 µg/L | 2/2 | SYR4 | 2018–2019 |
| Lithium | 10.3 µg/L No EPA limit set | 2/2 | UCMR-5 | 2024 |
| Benzo(A)Pyrene | 0.0220 µg/L 11% of the EPA limit 0.2000 µg/L | 1/14 | SYR4 | 2014–2019 |
| Chromium | 11.4 µg/L 11% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
| Fluoride | 100 µg/L 2.5% of the EPA limit 4000 µg/L | 1/3 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 970 µg/L No EPA limit set | 1/2 | SYR4 | 2018–2019 |
84 contaminants tested, none detected
Utility contact
Frequently asked questions about Beaver Boro Muni Auth
Is Beaver Boro Muni Auth tap water safe to drink?
EPA monitoring detected 25 contaminants in Beaver Boro Muni Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Beaver Boro Muni Auth's water?
EPA monitoring detected Nitrate, Copper, Lead, Lead, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Beaver Boro Muni Auth serve?
Beaver Boro Muni Auth reports serving 5,799 people in Pennsylvania, per its EPA record.
Has Beaver Boro Muni Auth had any water quality violations?
The EPA has 642 violations on file for Beaver Boro Muni Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.