Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-07-01 → 2009-09-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
| MCL | Health-based | Resolved | 2009-04-01 → 2009-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 111 µg/L 139% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 140 µg/L | 61/61 | SYR4 | 2012–2019 |
| Bromodichloromethane | 27.3 µg/L No EPA limit set
worst single sample: 34.4 µg/L | 59/59 | SYR4 | 2012–2019 |
| Chloroform | 78.63 µg/L No EPA limit set
worst single sample: 107 µg/L | 59/59 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 25.48 µg/L 42% of the EPA limit 60 µg/L
worst single sample: 31.7 µg/L | 57/58 | SYR4 | 2012–2019 |
| Dibromochloromethane | 15.4 µg/L No EPA limit set
worst single sample: 23 µg/L | 56/59 | SYR4 | 2012–2019 |
| Copper | 263 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 360 µg/L | 36/36 | SYR4 | 2013–2019 |
| Bromoform | 4.476 µg/L No EPA limit set
worst single sample: 6 µg/L | 23/59 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 13.77 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 10/10 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 14.165 µg/L No EPA limit set
worst single sample: 15.2 µg/L | 10/10 | SYR4 | 2018–2019 |
| Dibromoacetic Acid | 1.4905 µg/L No EPA limit set
worst single sample: 1.51 µg/L | 4/10 | SYR4 | 2018–2019 |
| Lead | 0.0140 mg/L 93% of the EPA limit 0.0150 mg/L | 3/3 | LCR | 1996 |
| Lead | 1.2855 µg/L 8.6% of the EPA limit 15 µg/L
worst single sample: 1.3 µg/L | 2/36 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 4.1235 µg/L No EPA limit set
worst single sample: 4.13 µg/L | 2/10 | SYR4 | 2018–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Oakdale Boro Water Dept
Is Oakdale Boro Water Dept tap water safe to drink?
EPA monitoring detected 13 contaminants in Oakdale Boro Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Oakdale Boro Water Dept's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Total Haloacetic Acids (HAA5), Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Oakdale Boro Water Dept serve?
Oakdale Boro Water Dept reports serving 1,459 people in Pennsylvania, per its EPA record.
Has Oakdale Boro Water Dept had any water quality violations?
The EPA has 120 violations on file for Oakdale Boro Water Dept, of which 22 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.