Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2020-07-01 |
| Other | Monitoring | Resolved | 2020-07-01 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
| MR | Monitoring | Resolved | 2017-10-01 → 2017-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 296.5 µg/L 23% of the EPA limit 1300 µg/L
worst single sample: 460 µg/L | 70/70 | SYR4 | 2017–2019 |
| Bromodichloromethane | 24.785 µg/L No EPA limit set
worst single sample: 28.3 µg/L | 20/20 | SYR4 | 2017–2019 |
| Chloroform | 65.98 µg/L No EPA limit set
worst single sample: 67.5 µg/L | 20/20 | SYR4 | 2017–2019 |
| Dibromochloromethane | 12.755 µg/L No EPA limit set
worst single sample: 13.8 µg/L | 20/20 | SYR4 | 2017–2019 |
| TTHM | 97.7 µg/L 122% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 111 µg/L | 20/20 | SYR4 | 2017–2019 |
| Total Haloacetic Acids (HAA5) | 34.275 µg/L 57% of the EPA limit 60 µg/L
worst single sample: 52.8 µg/L | 20/20 | SYR4 | 2017–2019 |
| Dichloroacetic Acid | 25.835 µg/L No EPA limit set
worst single sample: 32.9 µg/L | 10/10 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 17.38 µg/L No EPA limit set
worst single sample: 19.9 µg/L | 10/10 | SYR4 | 2018–2019 |
| Bromoform | 1.462 µg/L No EPA limit set
worst single sample: 1.49 µg/L | 9/20 | SYR4 | 2017–2019 |
| Lead | 7.24 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 7.5 µg/L | 5/70 | SYR4 | 2017–2019 |
| Dibromoacetic Acid | 1.2105 µg/L No EPA limit set
worst single sample: 1.22 µg/L | 2/10 | SYR4 | 2018–2019 |
| Monochloroacetic Acid | 2.25 µg/L No EPA limit set | 1/10 | SYR4 | 2018–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Va Healthcare System Heinz
Is Va Healthcare System Heinz tap water safe to drink?
EPA monitoring detected 12 contaminants in Va Healthcare System Heinz's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Va Healthcare System Heinz's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Va Healthcare System Heinz serve?
Va Healthcare System Heinz reports serving 3,112 people in Pennsylvania, per its EPA record.
Has Va Healthcare System Heinz had any water quality violations?
The EPA has 10 violations on file for Va Healthcare System Heinz, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.