Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2017-07-01 → 2017-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
| MCL | Health-based | Resolved | 2011-07-01 → 2011-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 31.85 µg/L No EPA limit set
worst single sample: 41 µg/L | 64/64 | SYR4 | 2012–2019 |
| Chloroform | 73.975 µg/L No EPA limit set
worst single sample: 76 µg/L | 64/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 29.25 µg/L No EPA limit set
worst single sample: 35.4 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 108.25 µg/L 135% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 131 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 28 µg/L 47% of the EPA limit 60 µg/L
worst single sample: 32 µg/L | 61/64 | SYR4 | 2012–2019 |
| Copper | 81.3 µg/L 6.3% of the EPA limit 1300 µg/L
worst single sample: 299 µg/L | 59/68 | SYR4 | 2013–2019 |
| Bromoform | 10.68 µg/L No EPA limit set
worst single sample: 14 µg/L | 33/64 | SYR4 | 2012–2019 |
| Nitrate | 750 µg/L 7.5% of the EPA limit 10000 µg/L | 16/16 | SYR4 | 2012–2019 |
| Lead | 6.855 µg/L 46% of the EPA limit 15 µg/L
worst single sample: 10.3 µg/L | 14/68 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 11.015 µg/L No EPA limit set
worst single sample: 11.6 µg/L | 14/14 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 12.42 µg/L No EPA limit set
worst single sample: 13.5 µg/L | 13/14 | SYR4 | 2013–2019 |
| Lead | 0.0017 mg/L 11% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Fluoride | 776 µg/L 19% of the EPA limit 4000 µg/L
worst single sample: 790 µg/L | 8/8 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 11.186 µg/L No EPA limit set
worst single sample: 12.5 µg/L | 4/14 | SYR4 | 2013–2019 |
| Barium | 41.175 µg/L 2.1% of the EPA limit 2000 µg/L
worst single sample: 41.5 µg/L | 2/10 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.449 µg/L No EPA limit set
worst single sample: 1.47 µg/L | 2/14 | SYR4 | 2013–2019 |
| Arsenic | 0.4000 µg/L 4% of the EPA limit 10 µg/L | 1/10 | SYR4 | 2012–2019 |
| Nitrite | 110 µg/L 11% of the EPA limit 1000 µg/L | 1/8 | SYR4 | 2012–2019 |
91 contaminants tested, none detected
Utility contact
Frequently asked questions about Brackenridge Boro Water Dept
Is Brackenridge Boro Water Dept tap water safe to drink?
EPA monitoring detected 18 contaminants in Brackenridge Boro Water Dept's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brackenridge Boro Water Dept's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Brackenridge Boro Water Dept serve?
Brackenridge Boro Water Dept reports serving 3,700 people in Pennsylvania, per its EPA record.
Has Brackenridge Boro Water Dept had any water quality violations?
The EPA has 141 violations on file for Brackenridge Boro Water Dept, of which 32 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.