Tap WaterIndex

← Pennsylvania

Tap water quality report

Kreamer Mun Auth

EPA monitoring tested this supplier for 79 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
17
detected
980
people served
0
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Local government
Counties served
Snyder

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
85
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Archived 2026-01-01 → 2026-03-31
MR Monitoring Resolved 2024-06-01 → 2024-06-30
MON Monitoring Resolved 2022-12-01 → 2022-12-31
MON Monitoring Resolved 2022-12-01 → 2022-12-31
MON Monitoring Resolved 2022-12-01 → 2022-12-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
632.9 µg/L 49%
of the EPA limit 1300 µg/L
worst single sample: 966 µg/L
30/30 SYR4 2013–2019
Lead
10.196 µg/L 68%
of the EPA limit 15 µg/L
worst single sample: 13 µg/L
27/30 SYR4 2013–2019
Nitrate
3030 µg/L 30%
of the EPA limit 10000 µg/L
 20/32 SYR4 2012–2019
Barium
114.4 µg/L 5.7%
of the EPA limit 2000 µg/L
worst single sample: 115 µg/L
7/8 SYR4 2012–2018
Bromodichloromethane
5.847 µg/L
No EPA limit set
worst single sample: 6.09 µg/L
7/9 SYR4 2012–2019
Bromoform
2.81 µg/L
No EPA limit set
worst single sample: 2.84 µg/L
7/9 SYR4 2012–2019
Chloroform
8.777 µg/L
No EPA limit set
worst single sample: 9.08 µg/L
7/9 SYR4 2012–2019
Dibromochloromethane
6.001 µg/L
No EPA limit set
worst single sample: 6.28 µg/L
7/9 SYR4 2012–2019
TTHM
20.69 µg/L 26%
of the EPA limit 80 µg/L
worst single sample: 21.2 µg/L
7/9 SYR4 2012–2019
Lead
0.0500 mg/L 333%
above the EPA limit of 0.0150 mg/L
 5/5 LCR 2001
Total Haloacetic Acids (HAA5)
5.28 µg/L 8.8%
of the EPA limit 60 µg/L
worst single sample: 6.12 µg/L
5/9 SYR4 2012–2019
Trichloroacetic Acid
1.833 µg/L
No EPA limit set
worst single sample: 1.92 µg/L
4/8 SYR4 2014–2019
Arsenic
0.2409 µg/L 2.4%
of the EPA limit 10 µg/L
worst single sample: 0.2430 µg/L
2/8 SYR4 2012–2018
Fluoride
176 µg/L 4.4%
of the EPA limit 4000 µg/L
worst single sample: 180 µg/L
2/8 SYR4 2012–2018
Benzo(A)Pyrene
0.1800 µg/L 90%
of the EPA limit 0.2000 µg/L
 1/12 SYR4 2014–2019
Dibromoacetic Acid
6.12 µg/L
No EPA limit set
 1/8 SYR4 2014–2019
Selenium
2.09 µg/L 4.2%
of the EPA limit 50 µg/L
 1/8 SYR4 2012–2018
62 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalAtrazineBhc-GammaBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDichloroacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
PAT GEORGE
Phone
570-274-1755

Frequently asked questions about Kreamer Mun Auth

Is Kreamer Mun Auth tap water safe to drink?

EPA monitoring detected 17 contaminants in Kreamer Mun Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Kreamer Mun Auth's water?

EPA monitoring detected Copper, Lead, Nitrate, Barium, Bromodichloromethane, and others. The full list with the level and data source for each is above.

How many people does Kreamer Mun Auth serve?

Kreamer Mun Auth reports serving 980 people in Pennsylvania, per its EPA record.

Has Kreamer Mun Auth had any water quality violations?

The EPA has 85 violations on file for Kreamer Mun Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.