Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2025-11-01 → 2025-11-30 |
| MR | Monitoring | Resolved | 2025-11-01 → 2025-11-30 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| RPT | Monitoring | Resolved | 2023-09-11 |
| RPT | Monitoring | Resolved | 2023-09-11 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 5680 µg/L 57% of the EPA limit 10000 µg/L
worst single sample: 8200 µg/L | 336/336 | SYR4 | 2012–2019 |
| Copper | 204.6 µg/L 16% of the EPA limit 1300 µg/L
worst single sample: 480 µg/L | 253/256 | SYR4 | 2013–2019 |
| Lead | 12.9 µg/L 86% of the EPA limit 15 µg/L
worst single sample: 107 µg/L | 153/258 | SYR4 | 2013–2019 |
| TTHM | 14.895 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 25.8 µg/L | 84/106 | SYR4 | 2012–2019 |
| Chloroform | 10.29 µg/L No EPA limit set
worst single sample: 17.3 µg/L | 82/106 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.741 µg/L No EPA limit set
worst single sample: 5.89 µg/L | 78/106 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.9 µg/L No EPA limit set
worst single sample: 2.65 µg/L | 63/107 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 6.555 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 7.43 µg/L | 35/106 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.702 µg/L No EPA limit set
worst single sample: 5.5 µg/L | 28/92 | SYR4 | 2013–2019 |
| Barium | 29.625 µg/L 1.5% of the EPA limit 2000 µg/L
worst single sample: 32 µg/L | 20/20 | SYR4 | 2012–2019 |
| Lead | 0.0037 mg/L 25% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Fluoride | 826 µg/L 21% of the EPA limit 4000 µg/L | 11/20 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 4.4 µg/L No EPA limit set
worst single sample: 6.42 µg/L | 11/92 | SYR4 | 2013–2019 |
| Atrazine | 0.2000 µg/L 6.7% of the EPA limit 3 µg/L | 7/43 | SYR4 | 2012–2019 |
| Chromium | 1.02 µg/L 1% of the EPA limit 100 µg/L | 1/20 | SYR4 | 2012–2019 |
94 contaminants tested, none detected
Utility contact
Frequently asked questions about State College Boro Water Auth
Is State College Boro Water Auth tap water safe to drink?
EPA monitoring detected 15 contaminants in State College Boro Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in State College Boro Water Auth's water?
EPA monitoring detected Nitrate, Copper, Lead, TTHM, Chloroform, and others. The full list with the level and data source for each is above.
How many people does State College Boro Water Auth serve?
State College Boro Water Auth reports serving 72,000 people in Pennsylvania, per its EPA record.
Has State College Boro Water Auth had any water quality violations?
The EPA has 164 violations on file for State College Boro Water Auth, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.