Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-10-01 → 2022-12-31 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-07-01 → 2022-09-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 10.985 µg/L No EPA limit set
worst single sample: 12.8 µg/L | 64/64 | SYR4 | 2012–2019 |
| Chloroform | 109.376 µg/L No EPA limit set
worst single sample: 139 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 119.929 µg/L 150% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 152 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 171.5 µg/L 286% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 390 µg/L | 62/63 | SYR4 | 2012–2019 |
| Copper | 151.75 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 297 µg/L | 40/40 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.561 µg/L No EPA limit set
worst single sample: 2.91 µg/L | 20/64 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 95 µg/L No EPA limit set
worst single sample: 98 µg/L | 16/17 | SYR4 | 2015–2019 |
| Trichloroacetic Acid | 98.775 µg/L No EPA limit set
worst single sample: 120 µg/L | 16/17 | SYR4 | 2015–2019 |
| Lead | 0.0022 mg/L 14% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Monochloroacetic Acid | 277.5 µg/L No EPA limit set
worst single sample: 290 µg/L | 6/17 | SYR4 | 2015–2019 |
| Dibromoacetic Acid | 0.4400 µg/L No EPA limit set | 2/17 | SYR4 | 2015–2019 |
| Lead | 9.67 µg/L 64% of the EPA limit 15 µg/L
worst single sample: 10 µg/L | 2/30 | SYR4 | 2013–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Jackson Twp Water Auth
Is Jackson Twp Water Auth tap water safe to drink?
EPA monitoring detected 12 contaminants in Jackson Twp Water Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Jackson Twp Water Auth's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), Copper, and others. The full list with the level and data source for each is above.
How many people does Jackson Twp Water Auth serve?
Jackson Twp Water Auth reports serving 4,236 people in Pennsylvania, per its EPA record.
Has Jackson Twp Water Auth had any water quality violations?
The EPA has 295 violations on file for Jackson Twp Water Auth, of which 162 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.