Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2023-07-01 → 2023-09-30 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
| MR | Monitoring | Resolved | 2022-10-01 → 2022-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 283.4 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 345 µg/L | 15/15 | SYR4 | 2013–2019 |
| Nitrate | 815 µg/L 8.2% of the EPA limit 10000 µg/L | 8/16 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.56 µg/L No EPA limit set
worst single sample: 1.67 µg/L | 5/5 | SYR4 | 2012–2018 |
| Bromoform | 3.296 µg/L No EPA limit set
worst single sample: 3.53 µg/L | 5/5 | SYR4 | 2012–2018 |
| Dibromochloromethane | 2.826 µg/L No EPA limit set
worst single sample: 3.01 µg/L | 5/5 | SYR4 | 2012–2018 |
| Lead | 10.36 µg/L 69% of the EPA limit 15 µg/L
worst single sample: 12.6 µg/L | 5/15 | SYR4 | 2013–2019 |
| TTHM | 5.424 µg/L 6.8% of the EPA limit 80 µg/L
worst single sample: 5.57 µg/L | 3/3 | SYR4 | 2013–2018 |
| Barium | 58.73 µg/L 2.9% of the EPA limit 2000 µg/L
worst single sample: 59.5 µg/L | 2/3 | SYR4 | 2012–2018 |
| Arsenic | 0.7100 µg/L 7.1% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Beryllium, Total | 0.0700 µg/L 1.8% of the EPA limit 4 µg/L | 1/3 | SYR4 | 2012–2018 |
| Chloroform | 0.9600 µg/L No EPA limit set | 1/4 | SYR4 | 2012–2018 |
| Chromium | 0.8600 µg/L 0.9% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2012–2018 |
| Combined Uranium | 0.1118 µg/L 0.4% of the EPA limit 30 µg/L | 1/1 | SYR4 | 2013 |
| Lead | 0.0035 mg/L 23% of the EPA limit 0.0150 mg/L | 1/1 | LCR | 1994 |
| Selenium | 0.7100 µg/L 1.4% of the EPA limit 50 µg/L | 1/3 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 1.34 µg/L 2.2% of the EPA limit 60 µg/L | 1/3 | SYR4 | 2013–2018 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Morea Citizens Water Company
Is Morea Citizens Water Company tap water safe to drink?
EPA monitoring detected 16 contaminants in Morea Citizens Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Morea Citizens Water Company's water?
EPA monitoring detected Copper, Nitrate, Bromodichloromethane, Bromoform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Morea Citizens Water Company serve?
Morea Citizens Water Company reports serving 225 people in Pennsylvania, per its EPA record.
Has Morea Citizens Water Company had any water quality violations?
The EPA has 68 violations on file for Morea Citizens Water Company, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.