Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| TT | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| TT | Health-based | Resolved | 1996-10-01 → 1996-10-31 |
| TT | Health-based | Resolved | 1992-01-01 → 1994-10-13 |
| TT | Health-based | Archived | 1991-03-01 → 1991-03-31 |
| TT | Health-based | Archived | 1991-03-01 → 1991-03-31 |
| MR | Monitoring | Resolved | 2025-08-01 → 2025-08-31 |
| MR | Monitoring | Resolved | 2022-04-01 → 2022-06-30 |
| MR | Monitoring | Resolved | 2022-04-01 → 2022-06-30 |
| MR | Monitoring | Resolved | 2022-04-01 → 2022-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 58.09 µg/L 73% of the EPA limit 80 µg/L
worst single sample: 82.4 µg/L | 292/292 | SYR4 | 2012–2019 |
| Bromodichloromethane | 6.47 µg/L No EPA limit set
worst single sample: 7.3 µg/L | 267/267 | SYR4 | 2012–2019 |
| Chloroform | 50.97 µg/L No EPA limit set
worst single sample: 75.8 µg/L | 267/267 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 47.55 µg/L 79% of the EPA limit 60 µg/L
worst single sample: 70 µg/L | 250/256 | SYR4 | 2012–2019 |
| Dibromochloromethane | 0.9000 µg/L No EPA limit set
worst single sample: 1 µg/L | 181/265 | SYR4 | 2012–2019 |
| Copper | 121 µg/L 9.3% of the EPA limit 1300 µg/L
worst single sample: 931 µg/L | 153/153 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 21 µg/L No EPA limit set
worst single sample: 24 µg/L | 94/96 | SYR4 | 2017–2019 |
| Trichloroacetic Acid | 18.35 µg/L No EPA limit set
worst single sample: 21 µg/L | 94/96 | SYR4 | 2017–2019 |
| Lead | 43.2 µg/L 288% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 73 µg/L | 27/153 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Fluoride | 785 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 800 µg/L | 4/8 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 9 µg/L No EPA limit set | 1/96 | SYR4 | 2017–2019 |
96 contaminants tested, none detected
Utility contact
Frequently asked questions about City of Bethlehem
Is City of Bethlehem tap water safe to drink?
EPA monitoring detected 12 contaminants in City of Bethlehem's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in City of Bethlehem's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Total Haloacetic Acids (HAA5), Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does City of Bethlehem serve?
City of Bethlehem reports serving 117,259 people in Pennsylvania, per its EPA record.
Has City of Bethlehem had any water quality violations?
The EPA has 266 violations on file for City of Bethlehem, of which 6 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.