Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MCL | Health-based | Resolved | 1993-05-01 → 1993-05-31 |
| MR | Monitoring | Resolved | 2025-12-01 → 2025-12-31 |
| MR | Monitoring | Resolved | 2025-12-01 → 2025-12-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 15 µg/L 100% of the EPA limit 15 µg/L
worst single sample: 46.9 µg/L | 65/80 | SYR4 | 2013–2019 |
| Nitrate | 8124 µg/L 81% of the EPA limit 10000 µg/L
worst single sample: 8910 µg/L | 62/62 | SYR4 | 2012–2019 |
| Copper | 180.2 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 260 µg/L | 60/60 | SYR4 | 2013–2019 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2025 |
| Dibromochloromethane | 3.689 µg/L No EPA limit set
worst single sample: 3.78 µg/L | 8/8 | SYR4 | 2012–2019 |
| TTHM | 13 µg/L 16% of the EPA limit 80 µg/L
worst single sample: 14.4 µg/L | 8/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 3.779 µg/L No EPA limit set
worst single sample: 4.01 µg/L | 7/8 | SYR4 | 2012–2019 |
| Chloroform | 4.324 µg/L No EPA limit set
worst single sample: 4.93 µg/L | 7/8 | SYR4 | 2012–2019 |
| Bromoform | 1.582 µg/L No EPA limit set
worst single sample: 1.67 µg/L | 5/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 4.252 µg/L 7.1% of the EPA limit 60 µg/L
worst single sample: 4.3 µg/L | 5/8 | SYR4 | 2012–2019 |
| Barium | 22.4 µg/L 1.1% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2012 |
| Chromium | 2.1 µg/L 2.1% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2012 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
93 contaminants tested, none detected
Utility contact
Frequently asked questions about Catasauqua Mun Water Works
Is Catasauqua Mun Water Works tap water safe to drink?
EPA monitoring detected 16 contaminants in Catasauqua Mun Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Catasauqua Mun Water Works's water?
EPA monitoring detected Lead, Nitrate, Copper, Lead, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Catasauqua Mun Water Works serve?
Catasauqua Mun Water Works reports serving 6,598 people in Pennsylvania, per its EPA record.
Has Catasauqua Mun Water Works had any water quality violations?
The EPA has 125 violations on file for Catasauqua Mun Water Works, of which 8 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.