Tap WaterIndex

← Pennsylvania

Tap water quality report

Wbwa Mohrsville District

EPA monitoring tested this supplier for 80 contaminants and detected 15. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

80
contaminants tested
15
detected
375
people served
38
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Private
Counties served
Berks

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

38
health-based violations
165
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2008-01-01 → 2008-03-31
MCL Health-based Resolved 2008-01-01 → 2008-03-31
MCL Health-based Resolved 2008-01-01 → 2008-03-31
MCL Health-based Resolved 2008-01-01 → 2008-03-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-10-01 → 2007-12-31
MCL Health-based Resolved 2007-07-01 → 2007-09-30
MCL Health-based Resolved 2007-07-01 → 2007-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
648.3 µg/L 50%
of the EPA limit 1300 µg/L
worst single sample: 673 µg/L
23/25 SYR4 2012–2019
Nitrate
2670 µg/L 27%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Xylenes, Total
45.8 µg/L 0.5%
of the EPA limit 10000 µg/L
worst single sample: 61.4 µg/L
11/16 SYR4 2012–2019
Arsenic
23.75 µg/L 238%
of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 26 µg/L
10/32 SYR4 2012–2019
Ethylbenzene
7.45 µg/L 1.1%
of the EPA limit 700 µg/L
worst single sample: 9.1 µg/L
7/16 SYR4 2012–2019
Bromodichloromethane
5.635 µg/L
No EPA limit set
worst single sample: 5.8 µg/L
4/4 SYR4 2013–2018
Chloroform
18.785 µg/L
No EPA limit set
worst single sample: 19.7 µg/L
4/4 SYR4 2013–2018
Dibromochloromethane
2.525 µg/L
No EPA limit set
worst single sample: 2.6 µg/L
4/4 SYR4 2013–2018
Lead
0.0020 mg/L 13%
of the EPA limit 0.0150 mg/L
 4/4 LCR 1996
TTHM
26.945 µg/L 34%
of the EPA limit 80 µg/L
worst single sample: 28.1 µg/L
4/4 SYR4 2013–2018
Total Haloacetic Acids (HAA5)
8.6585 µg/L 14%
of the EPA limit 60 µg/L
worst single sample: 8.9 µg/L
4/4 SYR4 2013–2018
Barium
219 µg/L 11%
of the EPA limit 2000 µg/L
worst single sample: 230 µg/L
3/3 SYR4 2012–2018
Lead
27.2 µg/L 181%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 30 µg/L
3/25 SYR4 2012–2019
Dichloroacetic Acid
6.58 µg/L
No EPA limit set
 1/1 SYR4 2018
Trichloroacetic Acid
2.32 µg/L
No EPA limit set
 1/1 SYR4 2018
65 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumCombined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinFluorideGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl Chloridecis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
LEONARD BILGER
Phone
610-678-4400

Frequently asked questions about Wbwa Mohrsville District

Is Wbwa Mohrsville District tap water safe to drink?

EPA monitoring detected 15 contaminants in Wbwa Mohrsville District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Wbwa Mohrsville District's water?

EPA monitoring detected Copper, Nitrate, Xylenes, Total, Arsenic, Ethylbenzene, and others. The full list with the level and data source for each is above.

How many people does Wbwa Mohrsville District serve?

Wbwa Mohrsville District reports serving 375 people in Pennsylvania, per its EPA record.

Has Wbwa Mohrsville District had any water quality violations?

The EPA has 165 violations on file for Wbwa Mohrsville District, of which 38 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.