Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2020-03-01 → 2020-03-31 |
| MR | Monitoring | Resolved | 2020-03-01 → 2020-03-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-03-31 |
| MR | Monitoring | Resolved | 2020-01-01 → 2020-03-31 |
| Other | Monitoring | Resolved | 2015-07-01 |
| Other | Monitoring | Resolved | 2015-07-01 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-09-30 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-07-31 |
| MR | Monitoring | Resolved | 2014-07-01 → 2014-07-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 293.9 µg/L 23% of the EPA limit 1300 µg/L
worst single sample: 388 µg/L | 63/63 | SYR4 | 2013–2019 |
| Bromodichloromethane | 11.275 µg/L No EPA limit set
worst single sample: 11.8 µg/L | 24/24 | SYR4 | 2012–2019 |
| Chloroform | 38.515 µg/L No EPA limit set
worst single sample: 43.4 µg/L | 24/24 | SYR4 | 2012–2019 |
| TTHM | 51.705 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 57.5 µg/L | 24/24 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 28.88 µg/L 48% of the EPA limit 60 µg/L
worst single sample: 32.6 µg/L | 24/24 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.42 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 17/24 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Lead | 34.4 µg/L 229% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 52 µg/L | 12/63 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 14.84 µg/L No EPA limit set
worst single sample: 15.2 µg/L | 4/4 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 17.235 µg/L No EPA limit set
worst single sample: 17.4 µg/L | 4/4 | SYR4 | 2018–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Wyomissing Boro Water
Is Wyomissing Boro Water tap water safe to drink?
EPA monitoring detected 15 contaminants in Wyomissing Boro Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Wyomissing Boro Water's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Wyomissing Boro Water serve?
Wyomissing Boro Water reports serving 8,500 people in Pennsylvania, per its EPA record.
Has Wyomissing Boro Water had any water quality violations?
The EPA has 28 violations on file for Wyomissing Boro Water, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.