Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2015-10-01 → 2015-10-31 |
| TT | Health-based | Resolved | 2015-10-01 → 2015-10-31 |
| TT | Health-based | Resolved | 2015-10-01 → 2015-10-31 |
| TT | Health-based | Resolved | 2015-10-01 → 2015-10-31 |
| MCL | Health-based | Resolved | 2015-08-01 → 2015-08-31 |
| MCL | Health-based | Resolved | 2015-08-01 → 2015-08-31 |
| MCL | Health-based | Resolved | 2015-08-01 → 2015-08-31 |
| MCL | Health-based | Resolved | 2015-08-01 → 2015-08-31 |
| MCL | Health-based | Resolved | 1999-10-01 → 2000-09-30 |
| MCL | Health-based | Resolved | 1999-10-01 → 2000-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 8380 µg/L 84% of the EPA limit 10000 µg/L
worst single sample: 8920 µg/L | 88/92 | SYR4 | 2012–2019 |
| Copper | 522.75 µg/L 40% of the EPA limit 1300 µg/L
worst single sample: 629 µg/L | 54/60 | SYR4 | 2013–2019 |
| Bromodichloromethane | 7.8 µg/L No EPA limit set
worst single sample: 8.3 µg/L | 11/11 | SYR4 | 2013–2019 |
| Chloroform | 10.25 µg/L No EPA limit set
worst single sample: 10.4 µg/L | 11/11 | SYR4 | 2013–2019 |
| Dibromochloromethane | 4.9 µg/L No EPA limit set
worst single sample: 5 µg/L | 11/11 | SYR4 | 2013–2019 |
| TTHM | 23.7 µg/L 30% of the EPA limit 80 µg/L
worst single sample: 24.5 µg/L | 9/9 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 3.592 µg/L 6% of the EPA limit 60 µg/L
worst single sample: 4 µg/L | 9/9 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| Bromoform | 1.375 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 6/10 | SYR4 | 2013–2019 |
| Lead | 74.8 µg/L 499% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 89 µg/L | 5/60 | SYR4 | 2013–2019 |
| Combined Uranium | 12.0452 µg/L 40% of the EPA limit 30 µg/L
worst single sample: 12.1882 µg/L | 4/18 | SYR4 | 2012–2018 |
| Thallium, Total | 1.9 µg/L 95% of the EPA limit 2 µg/L
worst single sample: 2 µg/L | 3/9 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 2.95 µg/L No EPA limit set
worst single sample: 3 µg/L | 2/3 | SYR4 | 2017–2019 |
| Mercury | 0.8750 µg/L 44% of the EPA limit 2 µg/L
worst single sample: 0.9000 µg/L | 2/9 | SYR4 | 2012–2018 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/3 | SYR4 | 2017–2019 |
89 contaminants tested, none detected
Utility contact
Frequently asked questions about Caernarvon Twp Auth
Is Caernarvon Twp Auth tap water safe to drink?
EPA monitoring detected 21 contaminants in Caernarvon Twp Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Caernarvon Twp Auth's water?
EPA monitoring detected Nitrate, Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Caernarvon Twp Auth serve?
Caernarvon Twp Auth reports serving 4,245 people in Pennsylvania, per its EPA record.
Has Caernarvon Twp Auth had any water quality violations?
The EPA has 521 violations on file for Caernarvon Twp Auth, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.