Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2023-07-01 |
| Other | Monitoring | Resolved | 2023-07-01 |
| Other | Monitoring | Resolved | 2023-05-11 |
| Other | Monitoring | Resolved | 2023-05-11 |
| Other | Monitoring | Resolved | 2023-05-11 |
| Other | Monitoring | Resolved | 2023-05-11 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
| MR | Monitoring | Resolved | 2023-01-01 → 2023-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 1175.5 µg/L 90% of the EPA limit 1300 µg/L
worst single sample: 1820 µg/L | 30/30 | SYR4 | 2013–2019 |
| TTHM | 28.35 µg/L 35% of the EPA limit 80 µg/L
worst single sample: 34.4 µg/L | 12/12 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 37.925 µg/L 63% of the EPA limit 60 µg/L
worst single sample: 38.2 µg/L | 12/12 | SYR4 | 2013–2019 |
| Chloroform | 23.94 µg/L No EPA limit set
worst single sample: 27.7 µg/L | 9/9 | SYR4 | 2013–2019 |
| Bromodichloromethane | 4.8315 µg/L No EPA limit set
worst single sample: 5.29 µg/L | 8/8 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 35.825 µg/L No EPA limit set
worst single sample: 36.1 µg/L | 6/6 | SYR4 | 2013–2019 |
| Lead | 13.715 µg/L 91% of the EPA limit 15 µg/L
worst single sample: 14.9 µg/L | 4/30 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.664 µg/L No EPA limit set
worst single sample: 2.73 µg/L | 3/6 | SYR4 | 2013–2019 |
| Barium | 2.57 µg/L 0.1% of the EPA limit 2000 µg/L
worst single sample: 2.6 µg/L | 2/3 | SYR4 | 2012–2018 |
| Dibromochloromethane | 1.4255 µg/L No EPA limit set
worst single sample: 1.44 µg/L | 2/8 | SYR4 | 2013–2019 |
| Nitrate | 100 µg/L 1% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 3 µg/L No EPA limit set | 1/6 | SYR4 | 2013–2019 |
| Xylenes, Total | 1.2 µg/L 0% of the EPA limit 10000 µg/L | 1/8 | SYR4 | 2012–2019 |
65 contaminants tested, none detected
Utility contact
Frequently asked questions about Bcra Pocono Jackson
Is Bcra Pocono Jackson tap water safe to drink?
EPA monitoring detected 13 contaminants in Bcra Pocono Jackson's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bcra Pocono Jackson's water?
EPA monitoring detected Copper, TTHM, Total Haloacetic Acids (HAA5), Chloroform, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Bcra Pocono Jackson serve?
Bcra Pocono Jackson reports serving 2,100 people in Pennsylvania, per its EPA record.
Has Bcra Pocono Jackson had any water quality violations?
The EPA has 78 violations on file for Bcra Pocono Jackson, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.