Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| RPT | Monitoring | Resolved | 2017-04-01 |
| RPT | Monitoring | Resolved | 2017-04-01 |
| Other | Monitoring | Resolved | 2001-07-01 → 2001-07-25 |
| Other | Monitoring | Resolved | 2000-07-01 → 2000-07-11 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 2679 µg/L 27% of the EPA limit 10000 µg/L
worst single sample: 2940 µg/L | 144/144 | SYR4 | 2012–2019 |
| Copper | 1294.8 µg/L 100% of the EPA limit 1300 µg/L
worst single sample: 1740 µg/L | 89/93 | SYR4 | 2013–2019 |
| TTHM | 8.46 µg/L 11% of the EPA limit 80 µg/L
worst single sample: 12 µg/L | 42/51 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.4 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 39/51 | SYR4 | 2012–2019 |
| Bromodichloromethane | 2.69 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 35/51 | SYR4 | 2012–2019 |
| Chloroform | 2.62 µg/L No EPA limit set
worst single sample: 3.4 µg/L | 35/51 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.96 µg/L 4.9% of the EPA limit 60 µg/L
worst single sample: 3.5 µg/L | 28/51 | SYR4 | 2012–2019 |
| Lead | 43.15 µg/L 288% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 116 µg/L | 24/93 | SYR4 | 2013–2019 |
| Bromoform | 1.15 µg/L No EPA limit set
worst single sample: 1.5 µg/L | 15/51 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2025 |
| Arsenic | 3.8 µg/L 38% of the EPA limit 10 µg/L
worst single sample: 4 µg/L | 3/27 | SYR4 | 2012–2018 |
| Lithium | 19.4 µg/L No EPA limit set | 3/20 | UCMR-5 | 2025 |
| Beryllium, Total | 0.8850 µg/L 22% of the EPA limit 4 µg/L
worst single sample: 0.9000 µg/L | 2/27 | SYR4 | 2012–2018 |
| Di(2-ethylhexyl) Phthalate | 0.9000 µg/L 15% of the EPA limit 6 µg/L | 1/43 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 1 µg/L No EPA limit set | 1/3 | SYR4 | 2018–2019 |
| Selenium | 3 µg/L 6% of the EPA limit 50 µg/L | 1/27 | SYR4 | 2012–2018 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Pawc Pocono District
Is Pawc Pocono District tap water safe to drink?
EPA monitoring detected 21 contaminants in Pawc Pocono District's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pawc Pocono District's water?
EPA monitoring detected Nitrate, Copper, TTHM, Dibromochloromethane, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Pawc Pocono District serve?
Pawc Pocono District reports serving 17,860 people in Pennsylvania, per its EPA record.
Has Pawc Pocono District had any water quality violations?
The EPA has 4 violations on file for Pawc Pocono District, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.