Tap WaterIndex

← Pennsylvania

Tap water quality report

Twin Falls Mhp

EPA monitoring tested this supplier for 79 contaminants and detected 12. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

79
contaminants tested
12
detected
34
people served
0
health-based violations
Pennsylvania rankingsLead in PennsylvaniaPFAS in Pennsylvania
Water source
Ground water
Ownership
Private
Counties served
Monroe

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
98
violations on file
0
still open
ViolationTypeStatusPeriod
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2025-10-01 → 2025-10-31
MR Monitoring Resolved 2024-09-01 → 2024-09-30
Other Monitoring Resolved 2023-10-11
Other Monitoring Resolved 2023-10-11
Other Monitoring Resolved 2023-10-11
Other Monitoring Resolved 2023-10-11
Other Monitoring Resolved 2023-10-11
Other Monitoring Resolved 2023-10-11

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
3340 µg/L 33%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Copper
240.9 µg/L 19%
of the EPA limit 1300 µg/L
worst single sample: 257 µg/L
15/15 SYR4 2013–2019
TTHM
5.151 µg/L 6.4%
of the EPA limit 80 µg/L
worst single sample: 5.16 µg/L
4/6 SYR4 2013–2019
Bromodichloromethane
1.833 µg/L
No EPA limit set
worst single sample: 1.87 µg/L
3/5 SYR4 2013–2019
Chloroform
2.79 µg/L
No EPA limit set
worst single sample: 2.9 µg/L
3/5 SYR4 2013–2019
Dibromochloromethane
1.454 µg/L
No EPA limit set
worst single sample: 1.49 µg/L
3/5 SYR4 2013–2019
Lead
0.0010 mg/L 6.7%
of the EPA limit 0.0150 mg/L
 3/3 LCR 1995
Dichloroacetic Acid
28.955 µg/L
No EPA limit set
worst single sample: 30.4 µg/L
2/3 SYR4 2014–2019
Barium
10 µg/L 0.5%
of the EPA limit 2000 µg/L
 1/3 SYR4 2012–2018
Combined Uranium
2.1903 µg/L 7.3%
of the EPA limit 30 µg/L
 1/2 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
33.6 µg/L 56%
of the EPA limit 60 µg/L
 1/6 SYR4 2013–2019
Trichloroacetic Acid
3.2 µg/L
No EPA limit set
 1/3 SYR4 2014–2019
67 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,3,7,8-TCDD2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDibromoacetic AcidDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
JOHN YETTER
Phone
570-236-1941

Frequently asked questions about Twin Falls Mhp

Is Twin Falls Mhp tap water safe to drink?

EPA monitoring detected 12 contaminants in Twin Falls Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Twin Falls Mhp's water?

EPA monitoring detected Nitrate, Copper, TTHM, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Twin Falls Mhp serve?

Twin Falls Mhp reports serving 34 people in Pennsylvania, per its EPA record.

Has Twin Falls Mhp had any water quality violations?

The EPA has 98 violations on file for Twin Falls Mhp, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.