Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MON | Monitoring | Resolved | 2023-04-01 → 2023-04-30 |
| MON | Monitoring | Resolved | 2023-04-01 → 2023-04-30 |
| Other | Monitoring | Resolved | 2015-07-01 |
| MR | Monitoring | Resolved | 2013-04-01 → 2013-06-30 |
| MR | Monitoring | Resolved | 2013-04-01 → 2013-06-30 |
| MR | Monitoring | Resolved | 2013-04-01 → 2013-06-30 |
| MR | Monitoring | Resolved | 2013-04-01 → 2013-06-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 18.66 µg/L No EPA limit set
worst single sample: 20.4 µg/L | 64/64 | SYR4 | 2012–2019 |
| Copper | 258.5 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 346 µg/L | 64/64 | SYR4 | 2013–2019 |
| Chloroform | 65.13 µg/L No EPA limit set
worst single sample: 87.4 µg/L | 64/64 | SYR4 | 2012–2019 |
| TTHM | 80.395 µg/L 100% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 112 µg/L | 64/64 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 55.88 µg/L 93% of the EPA limit 60 µg/L
worst single sample: 74.1 µg/L | 64/64 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.48 µg/L No EPA limit set
worst single sample: 7.9 µg/L | 43/64 | SYR4 | 2012–2019 |
| Lead | 5.56 µg/L 37% of the EPA limit 15 µg/L
worst single sample: 91 µg/L | 29/64 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 29.705 µg/L No EPA limit set
worst single sample: 30.2 µg/L | 12/12 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 26.3 µg/L No EPA limit set
worst single sample: 28.5 µg/L | 12/12 | SYR4 | 2018–2019 |
| Lead | 0.0030 mg/L 20% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2025 |
| Bromoform | 0.5400 µg/L No EPA limit set | 1/64 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.11 µg/L No EPA limit set | 1/12 | SYR4 | 2018–2019 |
25 contaminants tested, none detected
Utility contact
Frequently asked questions about Veolia Water Bethel
Is Veolia Water Bethel tap water safe to drink?
EPA monitoring detected 19 contaminants in Veolia Water Bethel's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Veolia Water Bethel's water?
EPA monitoring detected Bromodichloromethane, Copper, Chloroform, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Veolia Water Bethel serve?
Veolia Water Bethel reports serving 7,809 people in Pennsylvania, per its EPA record.
Has Veolia Water Bethel had any water quality violations?
The EPA has 51 violations on file for Veolia Water Bethel, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.