Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2019-11-06 |
| TT | Health-based | Resolved | 2019-11-06 |
| TT | Health-based | Resolved | 2019-11-06 |
| TT | Health-based | Resolved | 2019-11-06 |
| TT | Health-based | Resolved | 2019-11-05 |
| TT | Health-based | Resolved | 2019-11-05 |
| TT | Health-based | Resolved | 2019-11-05 |
| TT | Health-based | Resolved | 2019-11-05 |
| TT | Health-based | Resolved | 2019-10-09 |
| TT | Health-based | Resolved | 2019-10-09 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 419.8 µg/L 32% of the EPA limit 1300 µg/L
worst single sample: 447 µg/L | 17/25 | SYR4 | 2012–2019 |
| Lead | 5.55 µg/L 37% of the EPA limit 15 µg/L
worst single sample: 6 µg/L | 4/25 | SYR4 | 2012–2019 |
| Bromodichloromethane | 4.19 µg/L No EPA limit set
worst single sample: 4.3 µg/L | 3/4 | SYR4 | 2014–2019 |
| Chloroform | 6.58 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 3/4 | SYR4 | 2014–2019 |
| Chromium | 4.9 µg/L 4.9% of the EPA limit 100 µg/L
worst single sample: 5 µg/L | 3/3 | SYR4 | 2012–2018 |
| Dibromochloromethane | 3.28 µg/L No EPA limit set
worst single sample: 3.3 µg/L | 3/4 | SYR4 | 2014–2019 |
| TTHM | 15.47 µg/L 19% of the EPA limit 80 µg/L
worst single sample: 16 µg/L | 3/4 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 6.612 µg/L 11% of the EPA limit 60 µg/L
worst single sample: 6.9 µg/L | 3/4 | SYR4 | 2014–2019 |
| Bromoform | 1.55 µg/L No EPA limit set
worst single sample: 1.6 µg/L | 2/4 | SYR4 | 2014–2019 |
| Lead | 0.6960 mg/L 4640% above the EPA limit of 0.0150 mg/L | 2/2 | LCR | 2007 |
| Nitrate | 1100 µg/L 11% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2 µg/L No EPA limit set | 1/2 | SYR4 | 2019 |
| Dichloroacetic Acid | 2 µg/L No EPA limit set | 1/2 | SYR4 | 2019 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Warwick Water Works
Is Warwick Water Works tap water safe to drink?
EPA monitoring detected 13 contaminants in Warwick Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Warwick Water Works's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Chromium, and others. The full list with the level and data source for each is above.
How many people does Warwick Water Works serve?
Warwick Water Works reports serving 98 people in Pennsylvania, per its EPA record.
Has Warwick Water Works had any water quality violations?
The EPA has 276 violations on file for Warwick Water Works, of which 27 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.