Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2022-04-01 |
| TT | Health-based | Resolved | 2022-04-01 |
| TT | Health-based | Resolved | 2022-04-01 |
| TT | Health-based | Resolved | 2022-04-01 |
| TT | Health-based | Resolved | 2022-04-01 |
| TT | Health-based | Resolved | 2022-04-01 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
| MCL | Health-based | Resolved | 2013-07-01 → 2013-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Nitrate | 10095 µg/L 101% of the EPA limit, at the 95th percentile of samples — 10000 µg/L
worst single sample: 13100 µg/L | 66/68 | SYR4 | 2012–2019 |
| Lead | 89 µg/L 593% of the EPA limit, at the 95th percentile of samples — 15 µg/L | 12/16 | SYR4 | 2013–2019 |
| Copper | 259 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 307 µg/L | 11/16 | SYR4 | 2013–2019 |
| Xylenes, Total | 4.3 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 4.6 µg/L | 7/8 | SYR4 | 2012–2019 |
| Lead | 0.0890 mg/L 593% above the EPA limit of 0.0150 mg/L | 6/6 | LCR | 2019 |
| Bromodichloromethane | 2.52 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 3/3 | SYR4 | 2013–2019 |
| Bromoform | 1.28 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.89 µg/L No EPA limit set
worst single sample: 1.9 µg/L | 3/3 | SYR4 | 2013–2019 |
| TTHM | 9.34 µg/L 12% of the EPA limit 80 µg/L
worst single sample: 9.5 µg/L | 3/3 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 4.877 µg/L 8.1% of the EPA limit 60 µg/L
worst single sample: 4.9 µg/L | 3/3 | SYR4 | 2013–2019 |
| Chloroform | 4.135 µg/L No EPA limit set
worst single sample: 4.2 µg/L | 2/3 | SYR4 | 2013–2019 |
| Ethylbenzene | 0.8850 µg/L 0.1% of the EPA limit 700 µg/L
worst single sample: 0.9000 µg/L | 2/8 | SYR4 | 2012–2019 |
| Barium | 106 µg/L 5.3% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2013 |
| Chromium | 1.1 µg/L 1.1% of the EPA limit 100 µg/L | 1/1 | SYR4 | 2013 |
| Dichloroacetic Acid | 1.82 µg/L No EPA limit set | 1/1 | SYR4 | 2019 |
| Nitrite | 110 µg/L 11% of the EPA limit 1000 µg/L | 1/33 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Highland Court
Is Highland Court tap water safe to drink?
EPA monitoring detected 16 contaminants in Highland Court's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Highland Court's water?
EPA monitoring detected Nitrate, Lead, Copper, Xylenes, Total, Lead, and others. The full list with the level and data source for each is above.
How many people does Highland Court serve?
Highland Court reports serving 54 people in Pennsylvania, per its EPA record.
Has Highland Court had any water quality violations?
The EPA has 292 violations on file for Highland Court, of which 29 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.