Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| MR | Monitoring | Resolved | 2024-09-01 → 2024-09-30 |
| RPT | Monitoring | Resolved | 2018-12-01 |
| RPT | Monitoring | Resolved | 2018-12-01 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14.79 µg/L No EPA limit set
worst single sample: 18.3 µg/L | 102/102 | SYR4 | 2012–2019 |
| Copper | 370.9 µg/L 29% of the EPA limit 1300 µg/L
worst single sample: 1060 µg/L | 102/103 | SYR4 | 2013–2019 |
| Chloroform | 54.08 µg/L No EPA limit set
worst single sample: 72.2 µg/L | 102/102 | SYR4 | 2012–2019 |
| TTHM | 64.585 µg/L 81% of the EPA limit 80 µg/L
worst single sample: 83.1 µg/L | 102/102 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.795 µg/L No EPA limit set
worst single sample: 4.7 µg/L | 82/102 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 29.47 µg/L 49% of the EPA limit 60 µg/L
worst single sample: 50.7 µg/L | 81/100 | SYR4 | 2012–2019 |
| Lead | 6.635 µg/L 44% of the EPA limit 15 µg/L
worst single sample: 24 µg/L | 34/103 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 11 µg/L No EPA limit set
worst single sample: 18 µg/L | 21/22 | SYR4 | 2018–2019 |
| Trichloroacetic Acid | 13.8 µg/L No EPA limit set
worst single sample: 21 µg/L | 19/22 | SYR4 | 2018–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Dibromoacetic Acid | 1 µg/L No EPA limit set | 1/22 | SYR4 | 2018–2019 |
25 contaminants tested, none detected
Utility contact
Frequently asked questions about Warwick Twp Water & Sewer Auth
Is Warwick Twp Water & Sewer Auth tap water safe to drink?
EPA monitoring detected 19 contaminants in Warwick Twp Water & Sewer Auth's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Warwick Twp Water & Sewer Auth's water?
EPA monitoring detected Bromodichloromethane, Copper, Chloroform, TTHM, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Warwick Twp Water & Sewer Auth serve?
Warwick Twp Water & Sewer Auth reports serving 14,699 people in Pennsylvania, per its EPA record.
Has Warwick Twp Water & Sewer Auth had any water quality violations?
The EPA has 245 violations on file for Warwick Twp Water & Sewer Auth, of which 4 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.