← Oregon

Tap water quality report

Seaside Water Department

EPA monitoring tested this supplier for 93 contaminants and detected 9. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

93
contaminants tested
9
detected
7,482
people served
20
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Clatsop

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

20
health-based violations
140
violations on file
1
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2010-08-01 → 2010-08-31
TT Health-based Resolved 2010-08-01 → 2010-08-31
TT Health-based Resolved 2010-08-01 → 2010-08-31
TT Health-based Resolved 2010-08-01 → 2010-08-31
MCL Health-based Resolved 1996-08-01 → 1996-08-31
MCL Health-based Resolved 1996-08-01 → 1996-08-31
MCL Health-based Resolved 1993-09-01 → 1993-09-30
MCL Health-based Resolved 1993-08-01 → 1993-08-31
MCL Health-based Resolved 1993-08-01 → 1993-08-31
MCL Health-based Resolved 1993-07-01 → 1993-07-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
121 µg/L 9.3%
of the EPA limit 1300 µg/L
worst single sample: 157 µg/L
21/64 SYR4 2013–2019
TTHM
46.945 µg/L 59%
of the EPA limit 80 µg/L
worst single sample: 49.7 µg/L
20/20 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
21.365 µg/L 36%
of the EPA limit 60 µg/L
worst single sample: 43.5 µg/L
20/20 SYR4 2012–2019
Lead
0.00071 mg/L 4.7%
of the EPA limit 0.0150 mg/L
15/15 LCR 2025
Lead
7.35 µg/L 49%
of the EPA limit 15 µg/L
worst single sample: 8 µg/L
14/64 SYR4 2013–2019
Nitrate
600 µg/L 6%
of the EPA limit 10000 µg/L
10/16 SYR4 2012–2019
Di(2-ethylhexyl) Phthalate
1.7 µg/L 28%
of the EPA limit 6 µg/L
1/11 SYR4 2012–2018
Nitrate-Nitrite
600 µg/L 6%
of the EPA limit 10000 µg/L
1/1 SYR4 2013
P-Dichlorobenzene
0.5000 µg/L 0.7%
of the EPA limit 75 µg/L
1/8 SYR4 2012–2019
84 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaArsenicAsbestosAtrazineBhc-GammaBenzeneBenzo(A)PyreneChlorobenzeneCarbofuranCarbon TetrachlorideChlordaneCombined Radium (-226 And -228)Combined UraniumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
SEASIDE WATER DEPARTMENT
Phone
503-738-5112
Email
[email protected]

Frequently asked questions about Seaside Water Department

Is Seaside Water Department tap water safe to drink?

EPA monitoring detected 9 contaminants in Seaside Water Department's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Seaside Water Department's water?

EPA monitoring detected Copper, TTHM, Total Haloacetic Acids (HAA5), Lead, Lead, and others. The full list with the level and data source for each is above.

How many people does Seaside Water Department serve?

Seaside Water Department reports serving 7,482 people in Oregon, per its EPA record.

Has Seaside Water Department had any water quality violations?

The EPA has 140 violations on file for Seaside Water Department, of which 20 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.