Tap WaterIndex

← Oregon

Tap water quality report

Skyview Acres Water Company

EPA monitoring tested this supplier for 5 contaminants and detected 5. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

5
contaminants tested
5
detected
200
people served
176
health-based violations
Oregon rankingsLead in OregonPFAS in Oregon
Water source
SWP
Ownership
Private
Counties served
Clackamas

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

176
health-based violations
246
violations on file
1
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-07-01 → 2025-09-30
MCL Health-based Archived 2025-04-01 → 2025-06-30
MCL Health-based Archived 2025-04-01 → 2025-06-30
MCL Health-based Archived 2025-04-01 → 2025-06-30
MCL Health-based Archived 2025-01-01 → 2025-03-31

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
601.25 µg/L 46%
of the EPA limit 1300 µg/L
worst single sample: 3300 µg/L
816/869 SYR4 2012–2019
Lead
20.9 µg/L 139%
of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 62.6 µg/L
761/869 SYR4 2012–2019
Lead
0.0070 mg/L 47%
of the EPA limit 0.0150 mg/L
 58/58 LCR 2023
TTHM
116.355 µg/L 145%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 138 µg/L
32/32 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
157.3 µg/L 262%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 225 µg/L
32/32 SYR4 2012–2019

Utility contact

Contact
SKYVIEW ACRES WATER COMPANY
Phone
503-310-9262
Email
[email protected]

Frequently asked questions about Skyview Acres Water Company

Is Skyview Acres Water Company tap water safe to drink?

EPA monitoring detected 5 contaminants in Skyview Acres Water Company's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Skyview Acres Water Company's water?

EPA monitoring detected Copper, Lead, Lead, TTHM, Total Haloacetic Acids (HAA5). The full list with the level and data source for each is above.

How many people does Skyview Acres Water Company serve?

Skyview Acres Water Company reports serving 200 people in Oregon, per its EPA record.

Has Skyview Acres Water Company had any water quality violations?

The EPA has 246 violations on file for Skyview Acres Water Company, of which 176 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.