Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-10-01 → 2019-12-31 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
| MCL | Health-based | Resolved | 2019-07-01 → 2019-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 878.717 µg/L 68% of the EPA limit 1300 µg/L
worst single sample: 2830 µg/L | 120/120 | SYR4 | 2013–2019 |
| Lead | 30.27 µg/L 202% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 266.94 µg/L | 108/120 | SYR4 | 2013–2019 |
| Chloroform | 121.1 µg/L No EPA limit set
worst single sample: 198 µg/L | 48/48 | SYR4 | 2014–2019 |
| TTHM | 134.59 µg/L 168% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 207.03 µg/L | 48/48 | SYR4 | 2014–2019 |
| Bromodichloromethane | 12.475 µg/L No EPA limit set
worst single sample: 15.3 µg/L | 46/48 | SYR4 | 2014–2019 |
| Total Haloacetic Acids (HAA5) | 110.645 µg/L 184% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 159.2 µg/L | 44/48 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 60.38 µg/L No EPA limit set
worst single sample: 66.1 µg/L | 44/48 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 65.22 µg/L No EPA limit set
worst single sample: 99.5 µg/L | 40/48 | SYR4 | 2014–2019 |
| Dibromochloromethane | 3.31 µg/L No EPA limit set
worst single sample: 4.16 µg/L | 32/48 | SYR4 | 2014–2019 |
| Lead | 0.0013 mg/L 8.5% of the EPA limit 0.0150 mg/L | 14/14 | LCR | 2025 |
| Monochloroacetic Acid | 5.75 µg/L No EPA limit set
worst single sample: 6.23 µg/L | 13/48 | SYR4 | 2014–2019 |
| Bromoform | 1.54 µg/L No EPA limit set | 1/48 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 3.27 µg/L No EPA limit set | 1/48 | SYR4 | 2014–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Clayton Pwa
Is Clayton Pwa tap water safe to drink?
EPA monitoring detected 13 contaminants in Clayton Pwa's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Clayton Pwa's water?
EPA monitoring detected Copper, Lead, Chloroform, TTHM, Bromodichloromethane, and others. The full list with the level and data source for each is above.
How many people does Clayton Pwa serve?
Clayton Pwa reports serving 719 people in Oklahoma, per its EPA record.
Has Clayton Pwa had any water quality violations?
The EPA has 111 violations on file for Clayton Pwa, of which 83 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.