Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Resolved | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Resolved | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Resolved | 2023-04-01 → 2023-06-30 |
| MCL | Health-based | Archived | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Archived | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Archived | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 160.75 µg/L 201% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 286 µg/L | 56/56 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 104 µg/L 173% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 123 µg/L | 56/56 | SYR4 | 2013–2019 |
| Bromodichloromethane | 39.165 µg/L No EPA limit set
worst single sample: 51.7 µg/L | 50/50 | SYR4 | 2013–2019 |
| Chloroform | 122.2 µg/L No EPA limit set
worst single sample: 242 µg/L | 50/50 | SYR4 | 2013–2019 |
| Dibromochloromethane | 24.715 µg/L No EPA limit set
worst single sample: 40.3 µg/L | 50/50 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 61.48 µg/L No EPA limit set
worst single sample: 71.6 µg/L | 49/50 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 38.86 µg/L No EPA limit set
worst single sample: 55.7 µg/L | 49/50 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 6.44 µg/L No EPA limit set
worst single sample: 7.23 µg/L | 41/50 | SYR4 | 2013–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2025 |
| Bromoform | 4.4695 µg/L No EPA limit set
worst single sample: 5.6 µg/L | 18/50 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 2.428 µg/L No EPA limit set
worst single sample: 2.54 µg/L | 15/50 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 10.48 µg/L No EPA limit set
worst single sample: 10.7 µg/L | 12/50 | SYR4 | 2013–2019 |
| Copper | 24.5 µg/L 1.9% of the EPA limit 1300 µg/L
worst single sample: 27 µg/L | 11/130 | SYR4 | 2014–2019 |
| Lead | 15.88 µg/L 106% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 18.4 µg/L | 8/130 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Payne Co Rwd #4
Is Payne Co Rwd #4 tap water safe to drink?
EPA monitoring detected 14 contaminants in Payne Co Rwd #4's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Payne Co Rwd #4's water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Payne Co Rwd #4 serve?
Payne Co Rwd #4 reports serving 820 people in Oklahoma, per its EPA record.
Has Payne Co Rwd #4 had any water quality violations?
The EPA has 356 violations on file for Payne Co Rwd #4, of which 287 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.