Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-04-01 → 2022-06-30 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
| MCL | Health-based | Resolved | 2022-01-01 → 2022-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 135.38 µg/L 169% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 174.4 µg/L | 25/25 | SYR4 | 2013–2019 |
| Bromodichloromethane | 44.51 µg/L No EPA limit set
worst single sample: 65.3 µg/L | 23/23 | SYR4 | 2013–2019 |
| Chloroform | 46.94 µg/L No EPA limit set
worst single sample: 70.6 µg/L | 23/23 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 12.715 µg/L No EPA limit set
worst single sample: 18.7 µg/L | 20/22 | SYR4 | 2013–2019 |
| Dibromochloromethane | 48.22 µg/L No EPA limit set
worst single sample: 65.9 µg/L | 17/23 | SYR4 | 2013–2019 |
| Copper | 113.85 µg/L 8.8% of the EPA limit 1300 µg/L
worst single sample: 208 µg/L | 15/15 | SYR4 | 2012–2018 |
| Total Haloacetic Acids (HAA5) | 25.6 µg/L 43% of the EPA limit 60 µg/L
worst single sample: 42.4 µg/L | 15/25 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 5.685 µg/L No EPA limit set
worst single sample: 7.7 µg/L | 14/22 | SYR4 | 2013–2019 |
| Lead | 0.00091 mg/L 6.1% of the EPA limit 0.0150 mg/L | 12/12 | LCR | 2024 |
| Bromoform | 56.255 µg/L No EPA limit set
worst single sample: 59 µg/L | 10/23 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 9.94 µg/L No EPA limit set
worst single sample: 11.8 µg/L | 5/22 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3.85 µg/L No EPA limit set
worst single sample: 3.9 µg/L | 2/22 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.395 µg/L No EPA limit set
worst single sample: 1.4 µg/L | 2/22 | SYR4 | 2013–2019 |
| Lead | 12.1 µg/L 81% of the EPA limit 15 µg/L | 1/15 | SYR4 | 2012–2018 |
Utility contact
Frequently asked questions about Creta Water Corporation
Is Creta Water Corporation tap water safe to drink?
EPA monitoring detected 14 contaminants in Creta Water Corporation's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Creta Water Corporation's water?
EPA monitoring detected TTHM, Bromodichloromethane, Chloroform, Dibromoacetic Acid, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Creta Water Corporation serve?
Creta Water Corporation reports serving 230 people in Oklahoma, per its EPA record.
Has Creta Water Corporation had any water quality violations?
The EPA has 316 violations on file for Creta Water Corporation, of which 143 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.