Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Addressed | 2024-10-17 |
| TT | Health-based | Addressed | 2024-10-17 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2019-04-01 → 2019-06-30 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
| MCL | Health-based | Resolved | 2016-01-01 → 2016-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 523.2 µg/L 40% of the EPA limit 1300 µg/L
worst single sample: 2490 µg/L | 33/45 | SYR4 | 2013–2019 |
| Chloroform | 84.8 µg/L No EPA limit set
worst single sample: 98.5 µg/L | 21/22 | SYR4 | 2014–2019 |
| TTHM | 114 µg/L 143% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 126 µg/L | 21/22 | SYR4 | 2014–2019 |
| Bromodichloromethane | 21.63 µg/L No EPA limit set
worst single sample: 22.2 µg/L | 20/22 | SYR4 | 2014–2019 |
| Dibromochloromethane | 10.3 µg/L No EPA limit set
worst single sample: 12.1 µg/L | 19/22 | SYR4 | 2014–2019 |
| Bromoform | 4.66 µg/L No EPA limit set
worst single sample: 6.79 µg/L | 16/22 | SYR4 | 2014–2019 |
| Lead | 0.00046 mg/L 3.1% of the EPA limit 0.0150 mg/L | 16/16 | LCR | 2025 |
| Total Haloacetic Acids (HAA5) | 54.45 µg/L 91% of the EPA limit 60 µg/L
worst single sample: 58.2 µg/L | 16/22 | SYR4 | 2014–2019 |
| Trichloroacetic Acid | 29.66 µg/L No EPA limit set
worst single sample: 33.3 µg/L | 15/22 | SYR4 | 2014–2019 |
| Dichloroacetic Acid | 24.34 µg/L No EPA limit set
worst single sample: 28 µg/L | 13/22 | SYR4 | 2014–2019 |
| Lead | 188.787 µg/L 1259% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 290 µg/L | 8/45 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 4.2185 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 4/22 | SYR4 | 2014–2019 |
| Dibromoacetic Acid | 3.035 µg/L No EPA limit set
worst single sample: 3.1 µg/L | 2/22 | SYR4 | 2014–2019 |
| Monobromoacetic Acid | 1.24 µg/L No EPA limit set | 1/22 | SYR4 | 2014–2019 |
Utility contact
Frequently asked questions about Phillips Rwd #1
Is Phillips Rwd #1 tap water safe to drink?
EPA monitoring detected 14 contaminants in Phillips Rwd #1's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Phillips Rwd #1's water?
EPA monitoring detected Copper, Chloroform, TTHM, Bromodichloromethane, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Phillips Rwd #1 serve?
Phillips Rwd #1 reports serving 140 people in Oklahoma, per its EPA record.
Has Phillips Rwd #1 had any water quality violations?
The EPA has 129 violations on file for Phillips Rwd #1, of which 17 are health-based (a contaminant limit or required treatment was breached) and 4 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.