Tap WaterIndex

← Ohio

Tap water quality report

Beverly Village

EPA monitoring tested this supplier for 66 contaminants and detected 16. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

66
contaminants tested
16
detected
1,900
people served
4
health-based violations
Ohio rankingsLead in OhioPFAS in Ohio
Water source
Ground water
Ownership
Local government
Counties served
Washington

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

4
health-based violations
44
violations on file
5
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MCL Health-based Resolved 1994-12-01 → 1994-12-31
MON Monitoring Resolved 2025-06-01 → 2025-06-30
MON Monitoring Resolved 2025-06-01 → 2025-06-30
MON Monitoring Resolved 2025-06-01 → 2025-06-30
Other Monitoring Unaddressed 2023-12-29
Other Monitoring Unaddressed 2020-10-21
Other Monitoring Unaddressed 2020-10-21

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Copper
153.4 µg/L 12%
of the EPA limit 1300 µg/L
worst single sample: 217 µg/L
33/40 SYR4 2012–2019
Lead
0.0017 mg/L 11%
of the EPA limit 0.0150 mg/L
 26/26 LCR 2025
Nitrate
6700 µg/L 67%
of the EPA limit 10000 µg/L
 16/16 SYR4 2012–2019
Bromodichloromethane
8.47 µg/L
No EPA limit set
worst single sample: 11.2 µg/L
14/14 SYR4 2013–2019
Chloroform
10.269 µg/L
No EPA limit set
worst single sample: 12.7 µg/L
14/14 SYR4 2013–2019
Dibromochloromethane
6.7 µg/L
No EPA limit set
 14/14 SYR4 2013–2019
TTHM
27.33 µg/L 34%
of the EPA limit 80 µg/L
worst single sample: 32.4 µg/L
14/14 SYR4 2013–2019
Bromoform
3.255 µg/L
No EPA limit set
worst single sample: 4.3 µg/L
12/14 SYR4 2013–2019
Nitrate-Nitrite
6595 µg/L 66%
of the EPA limit 10000 µg/L
worst single sample: 6700 µg/L
8/8 SYR4 2012–2019
Dichloroacetic Acid
4.1 µg/L
No EPA limit set
worst single sample: 5 µg/L
7/14 SYR4 2013–2019
Tetrachloroethylene
11.85 µg/L 237%
of the EPA limit, at the 95th percentile of samples — 5 µg/L
worst single sample: 15.5 µg/L
6/33 SYR4 2012–2019
Barium
75.41 µg/L 3.8%
of the EPA limit 2000 µg/L
worst single sample: 75.6 µg/L
3/3 SYR4 2013–2019
Dibromoacetic Acid
2 µg/L
No EPA limit set
worst single sample: 2.1 µg/L
3/14 SYR4 2013–2019
Lead
9.89 µg/L 66%
of the EPA limit 15 µg/L
worst single sample: 10 µg/L
2/40 SYR4 2012–2019
Trichloroacetic Acid
1.77 µg/L
No EPA limit set
worst single sample: 1.8 µg/L
2/14 SYR4 2013–2019
Total Haloacetic Acids (HAA5)
8.9 µg/L 15%
of the EPA limit 60 µg/L
 1/14 SYR4 2013–2019
50 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChromiumDichloromethaneDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDiquatEndothallEthylbenzeneFluorideGlyphosateLassoMercuryMethoxychlorMonobromoacetic AcidMonochloroacetic AcidNitriteOxamylPentachlorophenolPicloramSeleniumSimazineStyreneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)TrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
BROOKER, SAM
Phone
740-984-2348
Email
[email protected]

Frequently asked questions about Beverly Village

Is Beverly Village tap water safe to drink?

EPA monitoring detected 16 contaminants in Beverly Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Beverly Village's water?

EPA monitoring detected Copper, Lead, Nitrate, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.

How many people does Beverly Village serve?

Beverly Village reports serving 1,900 people in Ohio, per its EPA record.

Has Beverly Village had any water quality violations?

The EPA has 44 violations on file for Beverly Village, of which 4 are health-based (a contaminant limit or required treatment was breached) and 5 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.