Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2025-11-19 |
| Other | Monitoring | Resolved | 2025-11-19 |
| Other | Monitoring | Resolved | 2022-08-17 |
| Other | Monitoring | Resolved | 2022-08-17 |
| Other | Monitoring | Unaddressed | 2020-01-06 |
| Other | Monitoring | Unaddressed | 2018-11-09 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfpea | 0.0069 µg/L | 1/4 | 2024 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 13.7 µg/L No EPA limit set
worst single sample: 17 µg/L | 128/128 | SYR4 | 2012–2019 |
| Chloroform | 20.226 µg/L No EPA limit set
worst single sample: 26.06 µg/L | 128/128 | SYR4 | 2012–2019 |
| Dibromochloromethane | 21.322 µg/L No EPA limit set
worst single sample: 26.7 µg/L | 128/128 | SYR4 | 2012–2019 |
| TTHM | 53.0635 µg/L 66% of the EPA limit 80 µg/L
worst single sample: 65.9 µg/L | 128/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14.7625 µg/L 25% of the EPA limit 60 µg/L
worst single sample: 23.08 µg/L | 126/128 | SYR4 | 2012–2019 |
| Bromoform | 20.33 µg/L No EPA limit set
worst single sample: 27.64 µg/L | 121/128 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.8718 µg/L No EPA limit set
worst single sample: 10.43 µg/L | 120/128 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.3604 µg/L No EPA limit set
worst single sample: 14.68 µg/L | 107/128 | SYR4 | 2012–2019 |
| Copper | 81.82 µg/L 6.3% of the EPA limit 1300 µg/L
worst single sample: 157 µg/L | 93/93 | SYR4 | 2012–2018 |
| Trichloroacetic Acid | 5.37925 µg/L No EPA limit set
worst single sample: 6.217 µg/L | 56/128 | SYR4 | 2012–2019 |
| Lead | 10.53 µg/L 70% of the EPA limit 15 µg/L
worst single sample: 14 µg/L | 23/93 | SYR4 | 2012–2018 |
| Lead | 0.00090 mg/L 6% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2024 |
| Monochloroacetic Acid | 4.9645 µg/L No EPA limit set
worst single sample: 5.154 µg/L | 11/128 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.1 µg/L No EPA limit set | 1/128 | SYR4 | 2012–2019 |
29 contaminants tested, none detected
Frequently asked questions about Warren Co. Socialville
Is Warren Co. Socialville tap water safe to drink?
EPA monitoring detected 15 contaminants in Warren Co. Socialville's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Warren Co. Socialville's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Warren Co. Socialville serve?
Warren Co. Socialville reports serving 13,216 people, per its EPA record.
Has Warren Co. Socialville had any water quality violations?
The EPA has 6 violations on file for Warren Co. Socialville, of which 0 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.