Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 2004-04-01 → 2004-04-30 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
| MCL | Health-based | Resolved | 1997-08-01 → 1997-08-31 |
PFAS detected
| Contaminant | Max | Detection rate | Period |
|---|---|---|---|
| Pfpea | 0.0045 µg/L | 2/4 | 2025 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 140.2 µg/L 11% of the EPA limit 1300 µg/L
worst single sample: 413 µg/L | 217/240 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17.798 µg/L No EPA limit set
worst single sample: 22.78 µg/L | 115/115 | SYR4 | 2012–2019 |
| Dibromochloromethane | 23.249 µg/L No EPA limit set
worst single sample: 29.83 µg/L | 115/115 | SYR4 | 2012–2019 |
| TTHM | 68.948 µg/L 86% of the EPA limit 80 µg/L
worst single sample: 84.78 µg/L | 115/115 | SYR4 | 2012–2019 |
| Bromoform | 27.3355 µg/L No EPA limit set
worst single sample: 33.57 µg/L | 114/115 | SYR4 | 2012–2019 |
| Chloroform | 24.7425 µg/L No EPA limit set
worst single sample: 37.46 µg/L | 114/115 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 14.5025 µg/L 24% of the EPA limit 60 µg/L
worst single sample: 21.21 µg/L | 114/115 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 7.5936 µg/L No EPA limit set
worst single sample: 9.298 µg/L | 113/115 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 7.27805 µg/L No EPA limit set
worst single sample: 8.601 µg/L | 90/115 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 3.9089 µg/L No EPA limit set
worst single sample: 4.469 µg/L | 68/115 | SYR4 | 2012–2019 |
| Lead | 8.07 µg/L 54% of the EPA limit 15 µg/L
worst single sample: 33.2 µg/L | 51/240 | SYR4 | 2012–2019 |
| Lead | 0.0012 mg/L 8% of the EPA limit 0.0150 mg/L | 25/25 | LCR | 2025 |
| Monochloroacetic Acid | 4.9977 µg/L No EPA limit set
worst single sample: 5.355 µg/L | 7/115 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1 µg/L No EPA limit set | 1/115 | SYR4 | 2012–2019 |
29 contaminants tested, none detected
Utility contact
Frequently asked questions about Lebanon City
Is Lebanon City tap water safe to drink?
EPA monitoring detected 15 contaminants in Lebanon City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lebanon City's water?
EPA monitoring detected Copper, Bromodichloromethane, Dibromochloromethane, TTHM, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Lebanon City serve?
Lebanon City reports serving 20,700 people in Ohio, per its EPA record.
Has Lebanon City had any water quality violations?
The EPA has 51 violations on file for Lebanon City, of which 21 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.