Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2015-07-01 → 2015-09-30 |
| MCL | Health-based | Resolved | 2014-01-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-01-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-01-01 → 2014-03-31 |
| MCL | Health-based | Resolved | 2014-01-01 → 2014-03-31 |
| Other | Monitoring | Unaddressed | 2026-01-22 |
| RPT | Monitoring | Resolved | 2025-07-02 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 15.56 µg/L No EPA limit set
worst single sample: 18.5 µg/L | 63/63 | SYR4 | 2012–2019 |
| Chloroform | 91.89 µg/L No EPA limit set
worst single sample: 149 µg/L | 63/63 | SYR4 | 2012–2019 |
| TTHM | 108.4 µg/L 136% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 151 µg/L | 63/63 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 46.6475 µg/L No EPA limit set
worst single sample: 66.3 µg/L | 62/63 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 54.885 µg/L 91% of the EPA limit 60 µg/L
worst single sample: 109 µg/L | 62/63 | SYR4 | 2012–2019 |
| Copper | 71.06 µg/L 5.5% of the EPA limit 1300 µg/L
worst single sample: 101 µg/L | 58/60 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 14.76 µg/L No EPA limit set
worst single sample: 40 µg/L | 49/63 | SYR4 | 2012–2019 |
| Dibromochloromethane | 3.676 µg/L No EPA limit set
worst single sample: 4.24 µg/L | 32/63 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 15.715 µg/L No EPA limit set
worst single sample: 23.6 µg/L | 27/63 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 24/24 | LCR | 2025 |
| Dibromoacetic Acid | 4.1715 µg/L No EPA limit set
worst single sample: 4.59 µg/L | 10/63 | SYR4 | 2012–2019 |
| Lead | 25.68 µg/L 171% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 34.8 µg/L | 9/60 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.76 µg/L No EPA limit set
worst single sample: 1.84 µg/L | 3/63 | SYR4 | 2012–2019 |
| Bromoform | 0.5775 µg/L No EPA limit set
worst single sample: 0.5800 µg/L | 2/63 | SYR4 | 2012–2019 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about Lordstown Village
Is Lordstown Village tap water safe to drink?
EPA monitoring detected 18 contaminants in Lordstown Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lordstown Village's water?
EPA monitoring detected Bromodichloromethane, Chloroform, TTHM, Dichloroacetic Acid, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Lordstown Village serve?
Lordstown Village reports serving 3,515 people in Ohio, per its EPA record.
Has Lordstown Village had any water quality violations?
The EPA has 20 violations on file for Lordstown Village, of which 8 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.