Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2020-01-15 |
| Other | Monitoring | Resolved | 2015-07-01 |
| Other | Monitoring | Resolved | 2015-07-01 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
| MR | Monitoring | Resolved | 2009-07-01 → 2009-09-30 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 14.9015 µg/L No EPA limit set
worst single sample: 17.1 µg/L | 128/128 | SYR4 | 2012–2019 |
| Chloroform | 75.45 µg/L No EPA limit set
worst single sample: 80.65 µg/L | 128/128 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 37.042 µg/L No EPA limit set
worst single sample: 46.23 µg/L | 128/128 | SYR4 | 2012–2019 |
| TTHM | 90.186 µg/L 113% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 95.1 µg/L | 128/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 45.28 µg/L 75% of the EPA limit 60 µg/L
worst single sample: 62.12 µg/L | 128/128 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 9.46155 µg/L No EPA limit set
worst single sample: 13.6 µg/L | 112/128 | SYR4 | 2012–2019 |
| Copper | 98.1 µg/L 7.5% of the EPA limit 1300 µg/L
worst single sample: 226 µg/L | 71/122 | SYR4 | 2013–2019 |
| Dibromochloromethane | 4.565 µg/L No EPA limit set
worst single sample: 4.75 µg/L | 55/128 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 5.5293 µg/L No EPA limit set
worst single sample: 6.331 µg/L | 39/128 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 32/32 | LCR | 2025 |
| Lead | 11.9065 µg/L 79% of the EPA limit 15 µg/L
worst single sample: 12.7 µg/L | 4/121 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.6815 µg/L No EPA limit set
worst single sample: 1.71 µg/L | 4/128 | SYR4 | 2012–2019 |
27 contaminants tested, none detected
Utility contact
Frequently asked questions about Girard City
Is Girard City tap water safe to drink?
EPA monitoring detected 17 contaminants in Girard City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Girard City's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.
How many people does Girard City serve?
Girard City reports serving 14,122 people in Ohio, per its EPA record.
Has Girard City had any water quality violations?
The EPA has 23 violations on file for Girard City, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.