Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
| MCL | Health-based | Resolved | 1993-10-01 → 1993-10-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0013 mg/L 8.7% of the EPA limit 0.0150 mg/L | 18/18 | LCR | 2025 |
| Chloroform | 3.65 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 7/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 0.9225 µg/L No EPA limit set
worst single sample: 0.9300 µg/L | 6/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 2.5 µg/L No EPA limit set | 4/8 | SYR4 | 2012–2019 |
| TTHM | 4.525 µg/L 5.7% of the EPA limit 80 µg/L
worst single sample: 4.6 µg/L | 4/8 | SYR4 | 2012–2019 |
| Barium | 74.5 µg/L 3.7% of the EPA limit 2000 µg/L
worst single sample: 75 µg/L | 3/3 | SYR4 | 2013–2019 |
| Copper | 102.93 µg/L 7.9% of the EPA limit 1300 µg/L
worst single sample: 104 µg/L | 3/10 | SYR4 | 2014–2017 |
| Fluoride | 151.9 µg/L 3.8% of the EPA limit 4000 µg/L
worst single sample: 153 µg/L | 3/3 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.23 µg/L No EPA limit set
worst single sample: 2.3 µg/L | 3/8 | SYR4 | 2012–2019 |
| Arsenic | 4.9 µg/L 49% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.6000 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
41 contaminants tested, none detected
Utility contact
Frequently asked questions about Pine Mill Ridge 2500
Is Pine Mill Ridge 2500 tap water safe to drink?
EPA monitoring detected 11 contaminants in Pine Mill Ridge 2500's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pine Mill Ridge 2500's water?
EPA monitoring detected Lead, Chloroform, Bromodichloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Pine Mill Ridge 2500 serve?
Pine Mill Ridge 2500 reports serving 120 people in Ohio, per its EPA record.
Has Pine Mill Ridge 2500 had any water quality violations?
The EPA has 104 violations on file for Pine Mill Ridge 2500, of which 10 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.