Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 865.65 µg/L 67% of the EPA limit 1300 µg/L
worst single sample: 1050 µg/L | 204/240 | SYR4 | 2012–2018 |
| Bromodichloromethane | 22.78 µg/L No EPA limit set
worst single sample: 27.5 µg/L | 133/133 | SYR4 | 2012–2019 |
| Chloroform | 42.496 µg/L No EPA limit set
worst single sample: 53.17 µg/L | 133/133 | SYR4 | 2012–2019 |
| Dibromochloromethane | 12.812 µg/L No EPA limit set
worst single sample: 16.2 µg/L | 133/133 | SYR4 | 2012–2019 |
| TTHM | 76.24 µg/L 95% of the EPA limit 80 µg/L
worst single sample: 92.4 µg/L | 132/132 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 34.97 µg/L 58% of the EPA limit 60 µg/L
worst single sample: 63.8 µg/L | 127/128 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 14.15 µg/L No EPA limit set
worst single sample: 23.8 µg/L | 126/127 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 16.733 µg/L No EPA limit set
worst single sample: 35.3 µg/L | 123/127 | SYR4 | 2012–2019 |
| Bromoform | 1.83 µg/L No EPA limit set
worst single sample: 2.5 µg/L | 111/132 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.394 µg/L No EPA limit set
worst single sample: 4.5 µg/L | 97/126 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 31/31 | LCR | 2024 |
| Monobromoacetic Acid | 28.68 µg/L No EPA limit set
worst single sample: 30.3 µg/L | 13/128 | SYR4 | 2012–2019 |
| Lead | 42.875 µg/L 286% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 58.8 µg/L | 8/240 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 7.031 µg/L No EPA limit set
worst single sample: 7.1 µg/L | 7/126 | SYR4 | 2012–2019 |
| Fluoride | 778 µg/L 19% of the EPA limit 4000 µg/L
worst single sample: 800 µg/L | 3/3 | SYR4 | 2013–2019 |
| Barium | 61.995 µg/L 3.1% of the EPA limit 2000 µg/L
worst single sample: 62.1 µg/L | 2/3 | SYR4 | 2013–2019 |
| Lithium | 10.4 µg/L No EPA limit set | 1/2 | UCMR-5 | 2023 |
67 contaminants tested, none detected
Utility contact
Frequently asked questions about Cuyahoga Falls City
Is Cuyahoga Falls City tap water safe to drink?
EPA monitoring detected 17 contaminants in Cuyahoga Falls City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Cuyahoga Falls City's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.
How many people does Cuyahoga Falls City serve?
Cuyahoga Falls City reports serving 51,114 people in Ohio, per its EPA record.
Has Cuyahoga Falls City had any water quality violations?
The EPA has 100 violations on file for Cuyahoga Falls City, of which 5 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.