Tap WaterIndex

← Ohio

Tap water quality report

Alliance City

EPA monitoring tested this supplier for 83 contaminants and detected 19. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

83
contaminants tested
19
detected
22,232
people served
56
health-based violations
Ohio rankingsLead in OhioPFAS in Ohio
Water source
Surface water
Ownership
Local government
Counties served
Stark

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

56
health-based violations
74
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2023-03-01 → 2023-03-31
TT Health-based Resolved 2023-03-01 → 2023-03-31
TT Health-based Resolved 2023-03-01 → 2023-03-31
TT Health-based Resolved 2023-03-01 → 2023-03-31
TT Health-based Resolved 2021-06-01 → 2021-06-30
TT Health-based Resolved 2021-06-01 → 2021-06-30
TT Health-based Resolved 2021-06-01 → 2021-06-30
TT Health-based Resolved 2016-05-01 → 2016-05-31
TT Health-based Resolved 2016-05-01 → 2016-05-31
TT Health-based Resolved 2016-05-01 → 2016-05-31

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfba 0.0054 µg/L 1/4 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chlorite
581.7 µg/L 58%
of the EPA limit 1000 µg/L
worst single sample: 638 µg/L
287/294 SYR4 2012–2019
Nitrate
656.5 µg/L 6.6%
of the EPA limit 10000 µg/L
worst single sample: 760 µg/L
188/192 SYR4 2012–2019
Bromodichloromethane
20.85 µg/L
No EPA limit set
worst single sample: 78.8 µg/L
139/139 SYR4 2012–2019
Chloroform
75.43 µg/L
No EPA limit set
worst single sample: 97 µg/L
139/139 SYR4 2012–2019
Dibromochloromethane
8.51 µg/L
No EPA limit set
worst single sample: 11.1 µg/L
139/139 SYR4 2012–2019
TTHM
100.24 µg/L 125%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 121.5 µg/L
137/137 SYR4 2012–2019
Dichloroacetic Acid
29.775 µg/L
No EPA limit set
worst single sample: 38 µg/L
128/128 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
50.115 µg/L 84%
of the EPA limit 60 µg/L
worst single sample: 72.4 µg/L
128/128 SYR4 2012–2019
Trichloroacetic Acid
18.23 µg/L
No EPA limit set
worst single sample: 30 µg/L
128/128 SYR4 2012–2019
Dibromoacetic Acid
2.6 µg/L
No EPA limit set
worst single sample: 3 µg/L
97/126 SYR4 2012–2019
Nitrate-Nitrite
653.5 µg/L 6.5%
of the EPA limit 10000 µg/L
worst single sample: 760 µg/L
94/96 SYR4 2012–2019
Copper
146.5 µg/L 11%
of the EPA limit 1300 µg/L
worst single sample: 220 µg/L
88/94 SYR4 2013–2018
Monochloroacetic Acid
5.534 µg/L
No EPA limit set
worst single sample: 6.18 µg/L
57/127 SYR4 2012–2019
Bromoform
1.6 µg/L
No EPA limit set
worst single sample: 1.8 µg/L
41/137 SYR4 2012–2019
Lead
0.0019 mg/L 13%
of the EPA limit 0.0150 mg/L
 22/22 LCR 2025
Lead
13.58 µg/L 91%
of the EPA limit 15 µg/L
worst single sample: 17 µg/L
10/94 SYR4 2013–2018
Barium
34.2 µg/L 1.7%
of the EPA limit 2000 µg/L
worst single sample: 37 µg/L
8/8 SYR4 2012–2019
Fluoride
1095.5 µg/L 27%
of the EPA limit 4000 µg/L
worst single sample: 1120 µg/L
8/8 SYR4 2012–2019
64 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMercuryMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitritePFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
ELLIOTT, AMY S.
Phone
330-829-2241
Email
[email protected]

Frequently asked questions about Alliance City

Is Alliance City tap water safe to drink?

EPA monitoring detected 19 contaminants in Alliance City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Alliance City's water?

EPA monitoring detected Chlorite, Nitrate, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.

How many people does Alliance City serve?

Alliance City reports serving 22,232 people in Ohio, per its EPA record.

Has Alliance City had any water quality violations?

The EPA has 74 violations on file for Alliance City, of which 56 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.