Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2010-10-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2010-10-01 → 2010-12-31 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-09-30 |
| MCL | Health-based | Resolved | 2010-07-01 → 2010-09-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0043 mg/L 29% of the EPA limit 0.0150 mg/L | 28/28 | LCR | 2025 |
| Copper | 1754 µg/L 135% of the EPA limit, at the 95th percentile of samples — 1300 µg/L
worst single sample: 2060 µg/L | 10/37 | SYR4 | 2014–2018 |
| Arsenic | 7.5325 µg/L 75% of the EPA limit 10 µg/L
worst single sample: 7.55 µg/L | 8/34 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.709 µg/L No EPA limit set
worst single sample: 6.36 µg/L | 8/11 | SYR4 | 2013–2019 |
| Chloroform | 5.059 µg/L No EPA limit set
worst single sample: 5.43 µg/L | 8/11 | SYR4 | 2013–2019 |
| Dibromochloromethane | 3.9235 µg/L No EPA limit set
worst single sample: 4.55 µg/L | 8/11 | SYR4 | 2013–2019 |
| TTHM | 15.998 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 17.09 µg/L | 5/7 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 2.413 µg/L No EPA limit set
worst single sample: 2.44 µg/L | 4/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.3175 µg/L No EPA limit set
worst single sample: 2.4 µg/L | 4/7 | SYR4 | 2013–2019 |
| Fluoride | 2435 µg/L 61% of the EPA limit 4000 µg/L
worst single sample: 2530 µg/L | 3/3 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 1.2745 µg/L No EPA limit set
worst single sample: 1.28 µg/L | 2/7 | SYR4 | 2013–2019 |
| Nitrate | 1800 µg/L 18% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Bromoform | 0.7500 µg/L No EPA limit set | 1/11 | SYR4 | 2013–2019 |
| Lead | 5.24 µg/L 35% of the EPA limit 15 µg/L | 1/37 | SYR4 | 2014–2018 |
| Nitrate-Nitrite | 1800 µg/L 18% of the EPA limit 10000 µg/L | 1/5 | SYR4 | 2012–2016 |
| Xylenes, Total | 0.8600 µg/L 0% of the EPA limit 10000 µg/L | 1/4 | SYR4 | 2013–2019 |
36 contaminants tested, none detected
Utility contact
Frequently asked questions about Lake View Village Mhp
Is Lake View Village Mhp tap water safe to drink?
EPA monitoring detected 16 contaminants in Lake View Village Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lake View Village Mhp's water?
EPA monitoring detected Lead, Copper, Arsenic, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Lake View Village Mhp serve?
Lake View Village Mhp reports serving 56 people in Ohio, per its EPA record.
Has Lake View Village Mhp had any water quality violations?
The EPA has 183 violations on file for Lake View Village Mhp, of which 35 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.