Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| Other | Monitoring | Unaddressed | 2024-12-23 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| RPT | Monitoring | Resolved | 2024-10-17 |
| MON | Monitoring | Resolved | 2017-04-01 → 2017-04-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 470 µg/L 36% of the EPA limit 1300 µg/L
worst single sample: 830 µg/L | 41/41 | SYR4 | 2012–2019 |
| Lead | 0.0036 mg/L 24% of the EPA limit 0.0150 mg/L | 21/21 | LCR | 2025 |
| Lead | 15.95 µg/L 106% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 34 µg/L | 20/41 | SYR4 | 2012–2019 |
| Bromodichloromethane | 11.135 µg/L No EPA limit set
worst single sample: 11.2 µg/L | 14/15 | SYR4 | 2013–2019 |
| Chloroform | 19.92 µg/L No EPA limit set
worst single sample: 20.7 µg/L | 14/15 | SYR4 | 2013–2019 |
| Dibromochloromethane | 7.94 µg/L No EPA limit set
worst single sample: 8.2 µg/L | 14/15 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 7.435 µg/L No EPA limit set
worst single sample: 8.8 µg/L | 14/14 | SYR4 | 2013–2019 |
| TTHM | 37.34 µg/L 47% of the EPA limit 80 µg/L
worst single sample: 37.6 µg/L | 14/14 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 7.055 µg/L No EPA limit set
worst single sample: 7.9 µg/L | 14/14 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 17.1 µg/L 29% of the EPA limit 60 µg/L
worst single sample: 21 µg/L | 13/14 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.51 µg/L No EPA limit set
worst single sample: 2.6 µg/L | 10/14 | SYR4 | 2013–2019 |
| Bromoform | 1.7 µg/L No EPA limit set | 7/15 | SYR4 | 2013–2019 |
| Fluoride | 1659 µg/L 41% of the EPA limit 4000 µg/L
worst single sample: 1670 µg/L | 3/3 | SYR4 | 2013–2019 |
| Barium | 109.25 µg/L 5.5% of the EPA limit 2000 µg/L
worst single sample: 110 µg/L | 2/3 | SYR4 | 2013–2019 |
| Combined Radium (-226 And -228) | 3.878 pCi/L 78% of the EPA limit 5 pCi/L
worst single sample: 3.9 pCi/L | 2/2 | SYR4 | 2013–2019 |
| Monochloroacetic Acid | 3 µg/L No EPA limit set | 1/14 | SYR4 | 2013–2019 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Bettsville Village
Is Bettsville Village tap water safe to drink?
EPA monitoring detected 16 contaminants in Bettsville Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bettsville Village's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Bettsville Village serve?
Bettsville Village reports serving 692 people in Ohio, per its EPA record.
Has Bettsville Village had any water quality violations?
The EPA has 119 violations on file for Bettsville Village, of which 4 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.