Compliance record
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 519.55 µg/L 40% of the EPA limit 1300 µg/L
worst single sample: 949 µg/L | 102/103 | SYR4 | 2012–2019 |
| Lead | 12.28 µg/L 82% of the EPA limit 15 µg/L
worst single sample: 43 µg/L | 52/103 | SYR4 | 2012–2019 |
| Lead | 0.0079 mg/L 53% of the EPA limit 0.0150 mg/L | 28/28 | LCR | 2025 |
| Bromodichloromethane | 7.8615 µg/L No EPA limit set
worst single sample: 10.3 µg/L | 22/24 | SYR4 | 2013–2019 |
| Chloroform | 13.806 µg/L No EPA limit set
worst single sample: 29.6 µg/L | 22/24 | SYR4 | 2013–2019 |
| Dibromochloromethane | 6.766 µg/L No EPA limit set
worst single sample: 7.12 µg/L | 22/24 | SYR4 | 2013–2019 |
| Nitrate | 442 µg/L 4.4% of the EPA limit 10000 µg/L | 18/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 4.5135 µg/L No EPA limit set
worst single sample: 4.8 µg/L | 16/16 | SYR4 | 2013–2019 |
| TTHM | 31.125 µg/L 39% of the EPA limit 80 µg/L
worst single sample: 45.6 µg/L | 16/16 | SYR4 | 2013–2019 |
| Total Haloacetic Acids (HAA5) | 8.7355 µg/L 15% of the EPA limit 60 µg/L
worst single sample: 8.824 µg/L | 16/16 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 3.802 µg/L No EPA limit set
worst single sample: 4.288 µg/L | 16/16 | SYR4 | 2013–2019 |
| Bromoform | 1.99 µg/L No EPA limit set
worst single sample: 2.1 µg/L | 12/24 | SYR4 | 2013–2019 |
| Dibromoacetic Acid | 2.2839 µg/L No EPA limit set
worst single sample: 2.349 µg/L | 8/16 | SYR4 | 2013–2019 |
| Barium | 258.25 µg/L 13% of the EPA limit 2000 µg/L
worst single sample: 261 µg/L | 6/6 | SYR4 | 2013–2019 |
| Fluoride | 1167.5 µg/L 29% of the EPA limit 4000 µg/L
worst single sample: 1180 µg/L | 6/6 | SYR4 | 2013–2019 |
| Arsenic | 3.918 µg/L 39% of the EPA limit 10 µg/L
worst single sample: 3.92 µg/L | 3/6 | SYR4 | 2013–2019 |
| Nitrate-Nitrite | 318.3 µg/L 3.2% of the EPA limit 10000 µg/L
worst single sample: 323 µg/L | 3/4 | SYR4 | 2012–2013 |
| P-Dichlorobenzene | 0.9285 µg/L 1.2% of the EPA limit 75 µg/L
worst single sample: 0.9500 µg/L | 2/8 | SYR4 | 2013–2019 |
| Cadmium | 0.2400 µg/L 4.8% of the EPA limit 5 µg/L | 1/6 | SYR4 | 2013–2019 |
| Thallium, Total | 1.3 µg/L 65% of the EPA limit 2 µg/L | 1/6 | SYR4 | 2013–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Eaton Public Water
Is Eaton Public Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Eaton Public Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Eaton Public Water's water?
EPA monitoring detected Copper, Lead, Lead, Bromodichloromethane, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Eaton Public Water serve?
Eaton Public Water reports serving 8,400 people in Ohio, per its EPA record.
Has Eaton Public Water had any water quality violations?
The EPA has no formal drinking-water violations on file for Eaton Public Water.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.