Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| TT | Health-based | Resolved | 2024-10-17 |
| MCL | Health-based | Resolved | 2007-10-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-10-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-10-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-10-01 → 2007-12-31 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
| MCL | Health-based | Resolved | 2007-04-01 → 2007-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 70.755 µg/L No EPA limit set
worst single sample: 74.1 µg/L | 38/38 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 26.685 µg/L No EPA limit set
worst single sample: 35.6 µg/L | 38/38 | SYR4 | 2012–2019 |
| TTHM | 82.48 µg/L 103% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 85.8 µg/L | 38/38 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 62.56 µg/L 104% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 78.3 µg/L | 38/38 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 33.835 µg/L No EPA limit set
worst single sample: 39.8 µg/L | 38/38 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.6 µg/L No EPA limit set
worst single sample: 6.9 µg/L | 36/38 | SYR4 | 2012–2019 |
| Bromodichloromethane | 10.26 µg/L No EPA limit set
worst single sample: 10.7 µg/L | 29/29 | SYR4 | 2013–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 10/10 | LCR | 2025 |
| Monochloroacetic Acid | 2.775 µg/L No EPA limit set
worst single sample: 2.9 µg/L | 6/38 | SYR4 | 2012–2019 |
| Copper | 100.3 µg/L 7.7% of the EPA limit 1300 µg/L
worst single sample: 118 µg/L | 5/15 | SYR4 | 2013–2019 |
| Monobromoacetic Acid | 1.78 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 3/38 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.8 µg/L No EPA limit set | 1/38 | SYR4 | 2012–2019 |
2 contaminants tested, none detected
Utility contact
Frequently asked questions about Pure Water System 2
Is Pure Water System 2 tap water safe to drink?
EPA monitoring detected 12 contaminants in Pure Water System 2's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Pure Water System 2's water?
EPA monitoring detected Chloroform, Dichloroacetic Acid, TTHM, Total Haloacetic Acids (HAA5), Trichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Pure Water System 2 serve?
Pure Water System 2 reports serving 279 people in Ohio, per its EPA record.
Has Pure Water System 2 had any water quality violations?
The EPA has 48 violations on file for Pure Water System 2, of which 12 are health-based (a contaminant limit or required treatment was breached) and 6 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.