Compliance record
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 509.2 µg/L 39% of the EPA limit 1300 µg/L
worst single sample: 771 µg/L | 95/96 | SYR4 | 2013–2019 |
| Lead | 12.36 µg/L 82% of the EPA limit 15 µg/L
worst single sample: 22.9 µg/L | 63/96 | SYR4 | 2013–2019 |
| Nitrate | 1590 µg/L 16% of the EPA limit 10000 µg/L
worst single sample: 1700 µg/L | 32/32 | SYR4 | 2012–2019 |
| Lead | 0.0036 mg/L 24% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2025 |
| Bromoform | 6.5845 µg/L No EPA limit set
worst single sample: 7.12 µg/L | 18/22 | SYR4 | 2012–2019 |
| Dibromochloromethane | 10.338 µg/L No EPA limit set
worst single sample: 10.78 µg/L | 18/22 | SYR4 | 2012–2019 |
| Bromodichloromethane | 5.1625 µg/L No EPA limit set
worst single sample: 5.68 µg/L | 16/22 | SYR4 | 2012–2019 |
| TTHM | 20.415 µg/L 26% of the EPA limit 80 µg/L
worst single sample: 23.6 µg/L | 14/16 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 4.2788 µg/L No EPA limit set
worst single sample: 4.961 µg/L | 13/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 5.003 µg/L 8.3% of the EPA limit 60 µg/L
worst single sample: 5.066 µg/L | 13/16 | SYR4 | 2012–2019 |
| Chloroform | 5.864 µg/L No EPA limit set
worst single sample: 8.64 µg/L | 9/22 | SYR4 | 2012–2019 |
| Barium | 94.525 µg/L 4.7% of the EPA limit 2000 µg/L
worst single sample: 99.6 µg/L | 6/6 | SYR4 | 2012–2018 |
| Fluoride | 222.8 µg/L 5.6% of the EPA limit 4000 µg/L
worst single sample: 223 µg/L | 3/6 | SYR4 | 2012–2018 |
| Nitrate-Nitrite | 1287 µg/L 13% of the EPA limit 10000 µg/L
worst single sample: 1290 µg/L | 2/2 | SYR4 | 2012 |
| Cadmium | 0.7800 µg/L 16% of the EPA limit 5 µg/L | 1/6 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 3.519 µg/L No EPA limit set | 1/16 | SYR4 | 2012–2019 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Oakwood City
Is Oakwood City tap water safe to drink?
EPA monitoring detected 20 contaminants in Oakwood City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Oakwood City's water?
EPA monitoring detected Copper, Lead, Nitrate, Lead, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Oakwood City serve?
Oakwood City reports serving 9,572 people in Ohio, per its EPA record.
Has Oakwood City had any water quality violations?
The EPA has no formal drinking-water violations on file for Oakwood City.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.