← Ohio

Tap water quality report

Troy City

EPA monitoring tested this supplier for 83 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

83
contaminants tested
20
detected
26,305
people served
0
health-based violations
Water source
Ground water
Ownership
Local government
Counties served
Miami

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
4
violations on file
0
still open
ViolationTypeStatusPeriod
Other Monitoring Resolved 2020-10-27
Other Monitoring Resolved 2020-10-27
Other Monitoring Resolved 2020-01-28
Other Monitoring Resolved 2020-01-28

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Bromodichloromethane
8.79 µg/L
No EPA limit set
worst single sample: 10.7 µg/L
55/55 SYR4 2012–2019
Bromoform
2.85 µg/L
No EPA limit set
worst single sample: 4.25 µg/L
55/55 SYR4 2012–2019
Chloroform
8.316 µg/L
No EPA limit set
worst single sample: 11 µg/L
55/55 SYR4 2012–2019
Dibromochloromethane
8.676 µg/L
No EPA limit set
worst single sample: 11.3 µg/L
54/54 SYR4 2012–2019
TTHM
26.84 µg/L 34%
of the EPA limit 80 µg/L
worst single sample: 35 µg/L
49/49 SYR4 2012–2019
Dibromoacetic Acid
2.715 µg/L
No EPA limit set
worst single sample: 3.1 µg/L
38/43 SYR4 2012–2019
Copper
75.5 µg/L 5.8%
of the EPA limit 1300 µg/L
worst single sample: 117 µg/L
36/92 SYR4 2013–2019
Dichloroacetic Acid
3.305 µg/L
No EPA limit set
worst single sample: 3.5 µg/L
34/43 SYR4 2012–2019
Lead
0.00050 mg/L 3.3%
of the EPA limit 0.0150 mg/L
19/19 LCR 2025
Nitrate
464 µg/L 4.6%
of the EPA limit 10000 µg/L
12/20 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
6.2 µg/L 10%
of the EPA limit 60 µg/L
12/43 SYR4 2012–2019
cis-1,2-Dichloroethylene
0.5940 µg/L 0.8%
of the EPA limit 70 µg/L
worst single sample: 0.6100 µg/L
9/41 SYR4 2012–2019
Lead
8.46 µg/L 56%
of the EPA limit 15 µg/L
worst single sample: 9.3 µg/L
7/92 SYR4 2013–2019
Nitrate-Nitrite
472.9 µg/L 4.7%
of the EPA limit 10000 µg/L
worst single sample: 487 µg/L
7/10 SYR4 2012–2019
Fluoride
451 µg/L 11%
of the EPA limit 4000 µg/L
worst single sample: 460 µg/L
6/6 SYR4 2012–2018
Trichloroacetic Acid
2.375 µg/L
No EPA limit set
worst single sample: 2.4 µg/L
6/43 SYR4 2012–2019
Monobromoacetic Acid
2.7 µg/L
No EPA limit set
4/43 SYR4 2012–2019
Barium
23.35 µg/L 1.2%
of the EPA limit 2000 µg/L
worst single sample: 24 µg/L
2/4 SYR4 2012–2018
Nitrite
419.145 µg/L 42%
of the EPA limit 1000 µg/L
worst single sample: 440 µg/L
2/9 SYR4 2012–2019
Tetrachloroethylene
0.8700 µg/L 17%
of the EPA limit 5 µg/L
1/41 SYR4 2012–2019
63 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMercuryMonochloroacetic AcidNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumSimazineStyreneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, TotalLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
EVANS, GARY
Phone
937-339-4826
Email
[email protected]

Frequently asked questions about Troy City

Is Troy City tap water safe to drink?

EPA monitoring detected 20 contaminants in Troy City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Troy City's water?

EPA monitoring detected Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane, TTHM, and others. The full list with the level and data source for each is above.

How many people does Troy City serve?

Troy City reports serving 26,305 people in Ohio, per its EPA record.

Has Troy City had any water quality violations?

The EPA has 4 violations on file for Troy City, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.