Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-10-01 → 2024-12-31 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-07-01 → 2024-09-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
| MCL | Health-based | Resolved | 2024-04-01 → 2024-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 107.625 µg/L 8.3% of the EPA limit 1300 µg/L
worst single sample: 258 µg/L | 68/70 | SYR4 | 2012–2019 |
| Bromodichloromethane | 17.275 µg/L No EPA limit set
worst single sample: 19.5 µg/L | 56/56 | SYR4 | 2012–2019 |
| Chloroform | 47.9 µg/L No EPA limit set
worst single sample: 50.4 µg/L | 56/56 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.8 µg/L No EPA limit set
worst single sample: 7 µg/L | 56/56 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 19.275 µg/L No EPA limit set
worst single sample: 21.7 µg/L | 56/56 | SYR4 | 2012–2019 |
| TTHM | 70.525 µg/L 88% of the EPA limit 80 µg/L
worst single sample: 75.7 µg/L | 56/56 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 40.775 µg/L 68% of the EPA limit 60 µg/L
worst single sample: 49.5 µg/L | 56/56 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 19.15 µg/L No EPA limit set
worst single sample: 27.8 µg/L | 56/56 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.95 µg/L No EPA limit set
worst single sample: 2.2 µg/L | 31/56 | SYR4 | 2012–2019 |
| Bromoform | 0.9000 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 26/56 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2025 |
| Monochloroacetic Acid | 8.92 µg/L No EPA limit set
worst single sample: 15.7 µg/L | 13/56 | SYR4 | 2012–2019 |
| Lead | 5.2 µg/L 35% of the EPA limit 15 µg/L | 4/70 | SYR4 | 2012–2019 |
1 contaminants tested, none detected
Utility contact
Frequently asked questions about Lagrange Village
Is Lagrange Village tap water safe to drink?
EPA monitoring detected 13 contaminants in Lagrange Village's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Lagrange Village's water?
EPA monitoring detected Copper, Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Lagrange Village serve?
Lagrange Village reports serving 2,400 people in Ohio, per its EPA record.
Has Lagrange Village had any water quality violations?
The EPA has 35 violations on file for Lagrange Village, of which 16 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.