Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Resolved | 2021-07-01 |
| Other | Monitoring | Resolved | 2021-07-01 |
| Other | Monitoring | Unaddressed | 2019-01-23 |
| MR | Monitoring | Resolved | 2009-12-31 |
| MR | Monitoring | Resolved | 2009-12-31 |
| MR | Monitoring | Resolved | 1995-01-01 |
| MR | Monitoring | Resolved | 1995-01-01 |
| MR | Monitoring | Resolved | 1995-01-01 |
| MR | Monitoring | Resolved | 1995-01-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 18.69 µg/L No EPA limit set
worst single sample: 48.4 µg/L | 128/128 | SYR4 | 2012–2019 |
| Chloroform | 50.04 µg/L No EPA limit set
worst single sample: 68.8 µg/L | 128/128 | SYR4 | 2012–2019 |
| Dibromochloromethane | 7.095 µg/L No EPA limit set
worst single sample: 10.3 µg/L | 128/128 | SYR4 | 2012–2019 |
| TTHM | 71.36 µg/L 89% of the EPA limit 80 µg/L
worst single sample: 107.4 µg/L | 128/128 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 20.38 µg/L No EPA limit set
worst single sample: 33.6 µg/L | 127/128 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 23.2 µg/L No EPA limit set
worst single sample: 48 µg/L | 121/128 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 47.16 µg/L 79% of the EPA limit 60 µg/L
worst single sample: 82 µg/L | 118/128 | SYR4 | 2012–2019 |
| Copper | 120 µg/L 9.2% of the EPA limit 1300 µg/L
worst single sample: 150 µg/L | 55/90 | SYR4 | 2012–2018 |
| Bromoform | 0.9000 µg/L No EPA limit set | 40/128 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.585 µg/L No EPA limit set
worst single sample: 1.8 µg/L | 24/128 | SYR4 | 2012–2019 |
| Lead | 0.0025 mg/L 17% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2024 |
| Monochloroacetic Acid | 3.6 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 21/128 | SYR4 | 2012–2019 |
| Lead | 21 µg/L 140% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 27 µg/L | 9/90 | SYR4 | 2012–2018 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Amherst City
Is Amherst City tap water safe to drink?
EPA monitoring detected 13 contaminants in Amherst City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Amherst City's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, TTHM, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Amherst City serve?
Amherst City reports serving 11,797 people in Ohio, per its EPA record.
Has Amherst City had any water quality violations?
The EPA has 9 violations on file for Amherst City, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.