Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| Other | Monitoring | Unaddressed | 2026-01-14 |
| Other | Monitoring | Resolved | 2006-07-01 |
| Other | Monitoring | Resolved | 2006-07-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 15/15 | LCR | 2023 |
| Dibromochloromethane | 7.538 µg/L No EPA limit set
worst single sample: 8.54 µg/L | 7/8 | SYR4 | 2012–2019 |
| Bromodichloromethane | 20 µg/L No EPA limit set
worst single sample: 24.2 µg/L | 6/8 | SYR4 | 2012–2019 |
| Copper | 187.5 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 203 µg/L | 6/10 | SYR4 | 2014–2017 |
| TTHM | 51.95 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 64 µg/L | 6/8 | SYR4 | 2012–2019 |
| Bromoform | 1.408 µg/L No EPA limit set
worst single sample: 1.51 µg/L | 5/8 | SYR4 | 2012–2019 |
| Chloroform | 25.675 µg/L No EPA limit set
worst single sample: 29.8 µg/L | 4/8 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 3.709 µg/L No EPA limit set
worst single sample: 3.91 µg/L | 3/8 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 38.58 µg/L No EPA limit set
worst single sample: 42.5 µg/L | 3/8 | SYR4 | 2012–2019 |
| Fluoride | 541 µg/L 14% of the EPA limit 4000 µg/L
worst single sample: 550 µg/L | 3/3 | SYR4 | 2012–2018 |
| Nitrate | 210 µg/L 2.1% of the EPA limit 10000 µg/L | 2/16 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 50.21 µg/L 84% of the EPA limit 60 µg/L
worst single sample: 51.8 µg/L | 2/8 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 8.8215 µg/L No EPA limit set
worst single sample: 9 µg/L | 2/8 | SYR4 | 2012–2019 |
| Arsenic | 4.5 µg/L 45% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2012–2018 |
| Combined Radium (-226 And -228) | 1.03 pCi/L 21% of the EPA limit 5 pCi/L | 1/1 | SYR4 | 2015 |
| Monobromoacetic Acid | 5.7 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
| Monochloroacetic Acid | 4.2 µg/L No EPA limit set | 1/8 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 210 µg/L 2.1% of the EPA limit 10000 µg/L | 1/8 | SYR4 | 2012–2019 |
35 contaminants tested, none detected
Utility contact
Frequently asked questions about Grandview Mhp B
Is Grandview Mhp B tap water safe to drink?
EPA monitoring detected 18 contaminants in Grandview Mhp B's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Grandview Mhp B's water?
EPA monitoring detected Lead, Dibromochloromethane, Bromodichloromethane, Copper, TTHM, and others. The full list with the level and data source for each is above.
How many people does Grandview Mhp B serve?
Grandview Mhp B reports serving 47 people in Ohio, per its EPA record.
Has Grandview Mhp B had any water quality violations?
The EPA has 3 violations on file for Grandview Mhp B, of which 0 are health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.