Tap WaterIndex

← Ohio

Tap water quality report

Willard City

EPA monitoring tested this supplier for 83 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

83
contaminants tested
18
detected
7,099
people served
5
health-based violations
Ohio rankingsLead in OhioPFAS in Ohio
Water source
Surface water
Ownership
Local government
Counties served
Huron

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

5
health-based violations
11
violations on file
0
still open
ViolationTypeStatusPeriod
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
TT Health-based Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
RPT Monitoring Resolved 2024-10-17
Other Monitoring Resolved 2003-07-01

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate
1050 µg/L 11%
of the EPA limit 10000 µg/L
worst single sample: 1210 µg/L
148/192 SYR4 2012–2019
Bromodichloromethane
18.355 µg/L
No EPA limit set
worst single sample: 23.7 µg/L
74/74 SYR4 2012–2019
Chloroform
59.985 µg/L
No EPA limit set
worst single sample: 95.6 µg/L
74/74 SYR4 2012–2019
Dibromochloromethane
6.7 µg/L
No EPA limit set
worst single sample: 9.1 µg/L
74/74 SYR4 2012–2019
Nitrate-Nitrite
1050 µg/L 11%
of the EPA limit 10000 µg/L
worst single sample: 1210 µg/L
74/96 SYR4 2012–2019
Dichloroacetic Acid
19.88 µg/L
No EPA limit set
worst single sample: 24.9 µg/L
72/72 SYR4 2012–2019
TTHM
84.89 µg/L 106%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 120.6 µg/L
72/72 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
35.855 µg/L 60%
of the EPA limit 60 µg/L
worst single sample: 42.6 µg/L
72/72 SYR4 2012–2019
Trichloroacetic Acid
15.65 µg/L
No EPA limit set
worst single sample: 24.2 µg/L
71/72 SYR4 2012–2019
Dibromoacetic Acid
2.23 µg/L
No EPA limit set
worst single sample: 3 µg/L
55/71 SYR4 2012–2019
Copper
293 µg/L 23%
of the EPA limit 1300 µg/L
worst single sample: 350 µg/L
38/55 SYR4 2014–2019
Bromoform
1 µg/L
No EPA limit set
 25/73 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 21/21 LCR 2026
Monochloroacetic Acid
3.88 µg/L
No EPA limit set
worst single sample: 4.6 µg/L
19/72 SYR4 2012–2019
Barium
34 µg/L 1.7%
of the EPA limit 2000 µg/L
 8/8 SYR4 2012–2019
Fluoride
933.6 µg/L 23%
of the EPA limit 4000 µg/L
worst single sample: 942 µg/L
8/8 SYR4 2012–2019
Lead
6.85 µg/L 46%
of the EPA limit 15 µg/L
worst single sample: 7.1 µg/L
2/40 SYR4 2014–2017
Simazine
0.0820 µg/L 2.1%
of the EPA limit 4 µg/L
 1/8 SYR4 2012–2019
65 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAsbestosAtrazineBenzeneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbon TetrachlorideChromiumDichloromethaneEthylbenzeneHfpo-DaLassoMercuryMonobromoacetic AcidNetfosaaNfdhaNmefosaaNitritePfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaSeleniumStyreneTetrachloroethyleneThallium, TotalTolueneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
HAMONS, BRYSON
Phone
419-933-2591
Email
[email protected]

Frequently asked questions about Willard City

Is Willard City tap water safe to drink?

EPA monitoring detected 18 contaminants in Willard City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Willard City's water?

EPA monitoring detected Nitrate, Bromodichloromethane, Chloroform, Dibromochloromethane, Nitrate-Nitrite, and others. The full list with the level and data source for each is above.

How many people does Willard City serve?

Willard City reports serving 7,099 people in Ohio, per its EPA record.

Has Willard City had any water quality violations?

The EPA has 11 violations on file for Willard City, of which 5 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.