Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-04-01 → 2018-06-30 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2018-01-01 → 2018-03-31 |
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
| MCL | Health-based | Resolved | 2017-10-01 → 2017-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 105.945 µg/L No EPA limit set
worst single sample: 185 µg/L | 38/38 | SYR4 | 2012–2019 |
| TTHM | 129.55 µg/L 162% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 216 µg/L | 38/38 | SYR4 | 2012–2019 |
| Bromodichloromethane | 18.66 µg/L No EPA limit set
worst single sample: 26.8 µg/L | 37/38 | SYR4 | 2012–2019 |
| Dibromochloromethane | 6.916 µg/L No EPA limit set
worst single sample: 47.8 µg/L | 37/38 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 33.1 µg/L No EPA limit set
worst single sample: 45.6 µg/L | 37/38 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 57.42 µg/L 96% of the EPA limit 60 µg/L
worst single sample: 81.2 µg/L | 37/38 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 31.12 µg/L No EPA limit set
worst single sample: 36 µg/L | 37/38 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2026 |
| Copper | 26.86 µg/L 2.1% of the EPA limit 1300 µg/L
worst single sample: 57.5 µg/L | 17/21 | SYR4 | 2012–2018 |
| Monochloroacetic Acid | 5.35 µg/L No EPA limit set
worst single sample: 5.55 µg/L | 17/38 | SYR4 | 2012–2019 |
| Bromoform | 0.9000 µg/L No EPA limit set
worst single sample: 0.9100 µg/L | 6/38 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.492 µg/L No EPA limit set
worst single sample: 2.55 µg/L | 5/38 | SYR4 | 2012–2019 |
| Monobromoacetic Acid | 1.742 µg/L No EPA limit set
worst single sample: 1.77 µg/L | 2/38 | SYR4 | 2012–2019 |
| Lead | 1.6 µg/L 11% of the EPA limit 15 µg/L | 1/21 | SYR4 | 2012–2018 |
Utility contact
Frequently asked questions about Hcwsd-Unionvale-Kenwood
Is Hcwsd-Unionvale-Kenwood tap water safe to drink?
EPA monitoring detected 14 contaminants in Hcwsd-Unionvale-Kenwood's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Hcwsd-Unionvale-Kenwood's water?
EPA monitoring detected Chloroform, TTHM, Bromodichloromethane, Dibromochloromethane, Dichloroacetic Acid, and others. The full list with the level and data source for each is above.
How many people does Hcwsd-Unionvale-Kenwood serve?
Hcwsd-Unionvale-Kenwood reports serving 257 people in Ohio, per its EPA record.
Has Hcwsd-Unionvale-Kenwood had any water quality violations?
The EPA has 63 violations on file for Hcwsd-Unionvale-Kenwood, of which 38 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.