Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2012-10-01 → 2012-12-31 |
| MCL | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| MCL | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| MCL | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| MCL | Health-based | Resolved | 2007-03-01 → 2007-03-31 |
| RPT | Monitoring | Resolved | 2025-07-02 |
| RPT | Monitoring | Resolved | 2025-07-02 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 17.56 µg/L No EPA limit set
worst single sample: 31.8 µg/L | 140/140 | SYR4 | 2012–2019 |
| Chloroform | 67.51 µg/L No EPA limit set
worst single sample: 93.1 µg/L | 140/140 | SYR4 | 2012–2019 |
| Dibromochloromethane | 9.2 µg/L No EPA limit set
worst single sample: 14.7 µg/L | 140/140 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 26.125 µg/L No EPA limit set
worst single sample: 34.6 µg/L | 140/140 | SYR4 | 2012–2019 |
| TTHM | 90.94 µg/L 114% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 127.4 µg/L | 140/140 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 49.255 µg/L 82% of the EPA limit 60 µg/L
worst single sample: 63 µg/L | 140/140 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 23.635 µg/L No EPA limit set
worst single sample: 27.4 µg/L | 140/140 | SYR4 | 2012–2019 |
| Copper | 67.89 µg/L 5.2% of the EPA limit 1300 µg/L
worst single sample: 463 µg/L | 132/132 | SYR4 | 2014–2019 |
| Monochloroacetic Acid | 5.32 µg/L No EPA limit set
worst single sample: 16.9 µg/L | 127/140 | SYR4 | 2012–2019 |
| Bromoform | 3.8 µg/L No EPA limit set
worst single sample: 6.3 µg/L | 91/140 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 2.85 µg/L No EPA limit set
worst single sample: 3.6 µg/L | 51/140 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 23/23 | LCR | 2025 |
| Lead | 9.94 µg/L 66% of the EPA limit 15 µg/L
worst single sample: 15.7 µg/L | 17/132 | SYR4 | 2014–2019 |
26 contaminants tested, none detected
Utility contact
Frequently asked questions about Bexley City
Is Bexley City tap water safe to drink?
EPA monitoring detected 18 contaminants in Bexley City's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Bexley City's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Bexley City serve?
Bexley City reports serving 14,250 people in Ohio, per its EPA record.
Has Bexley City had any water quality violations?
The EPA has 17 violations on file for Bexley City, of which 8 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.