Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2025-09-04 |
| TT | Health-based | Resolved | 2025-09-04 |
| MON | Monitoring | Archived | 2025-08-01 → 2025-08-31 |
| MON | Monitoring | Archived | 2025-08-01 → 2025-08-31 |
| MR | Monitoring | Archived | 2016-02-01 → 2016-02-29 |
| MR | Monitoring | Archived | 2016-02-01 → 2016-02-29 |
| MR | Monitoring | Archived | 2016-02-01 → 2016-02-29 |
| MR | Monitoring | Resolved | 2008-03-01 → 2008-03-31 |
| MR | Monitoring | Resolved | 2008-03-01 → 2008-03-31 |
| MR | Monitoring | Resolved | 2008-03-01 → 2008-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 156 µg/L 12% of the EPA limit 1300 µg/L
worst single sample: 277 µg/L | 28/30 | SYR4 | 2012–2017 |
| Lead | 0.0050 mg/L 33% of the EPA limit 0.0150 mg/L | 20/20 | LCR | 2023 |
| Bromodichloromethane | 4.564 µg/L No EPA limit set
worst single sample: 4.78 µg/L | 9/9 | SYR4 | 2013–2019 |
| Chloroform | 7.994 µg/L No EPA limit set
worst single sample: 8.59 µg/L | 9/9 | SYR4 | 2013–2019 |
| Dibromochloromethane | 1.754 µg/L No EPA limit set
worst single sample: 1.81 µg/L | 9/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 4.2749 µg/L No EPA limit set
worst single sample: 4.547 µg/L | 7/8 | SYR4 | 2013–2019 |
| TTHM | 14.493 µg/L 18% of the EPA limit 80 µg/L
worst single sample: 15.18 µg/L | 7/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 2.514 µg/L No EPA limit set
worst single sample: 2.52 µg/L | 7/8 | SYR4 | 2013–2019 |
| Lead | 7.17 µg/L 48% of the EPA limit 15 µg/L
worst single sample: 7.2 µg/L | 4/30 | SYR4 | 2012–2017 |
| Total Haloacetic Acids (HAA5) | 8.9805 µg/L 15% of the EPA limit 60 µg/L
worst single sample: 9.573 µg/L | 4/8 | SYR4 | 2013–2019 |
| Arsenic | 14.831 µg/L 148% of the EPA limit, at the 95th percentile of samples — 10 µg/L
worst single sample: 16.1 µg/L | 3/36 | SYR4 | 2012–2019 |
| Barium | 396 µg/L 20% of the EPA limit 2000 µg/L
worst single sample: 401 µg/L | 2/2 | SYR4 | 2014–2017 |
| Fluoride | 2422 µg/L 61% of the EPA limit 4000 µg/L
worst single sample: 2460 µg/L | 2/2 | SYR4 | 2014–2017 |
| Dibromoacetic Acid | 3.608 µg/L No EPA limit set | 1/8 | SYR4 | 2013–2019 |
38 contaminants tested, none detected
Utility contact
Frequently asked questions about Chateau Estates Mhp
Is Chateau Estates Mhp tap water safe to drink?
EPA monitoring detected 14 contaminants in Chateau Estates Mhp's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Chateau Estates Mhp's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Chloroform, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Chateau Estates Mhp serve?
Chateau Estates Mhp reports serving 430 people in Ohio, per its EPA record.
Has Chateau Estates Mhp had any water quality violations?
The EPA has 107 violations on file for Chateau Estates Mhp, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.