Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
| MCL | Health-based | Resolved | 2015-05-01 → 2015-05-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0056 mg/L 37% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2025 |
| Copper | 77.11 µg/L 5.9% of the EPA limit 1300 µg/L
worst single sample: 78.3 µg/L | 15/15 | SYR4 | 2012–2018 |
| Nitrate | 340 µg/L 3.4% of the EPA limit 10000 µg/L | 10/16 | SYR4 | 2012–2019 |
| Lead | 4.838 µg/L 32% of the EPA limit 15 µg/L
worst single sample: 5.51 µg/L | 7/15 | SYR4 | 2012–2018 |
| Dibromochloromethane | 1.393 µg/L No EPA limit set
worst single sample: 1.41 µg/L | 3/9 | SYR4 | 2013–2019 |
| TTHM | 6.827 µg/L 8.5% of the EPA limit 80 µg/L
worst single sample: 7.25 µg/L | 3/7 | SYR4 | 2013–2019 |
| Barium | 197.05 µg/L 9.9% of the EPA limit 2000 µg/L
worst single sample: 198 µg/L | 2/2 | SYR4 | 2014–2017 |
| Bromodichloromethane | 2.1035 µg/L No EPA limit set
worst single sample: 2.17 µg/L | 2/9 | SYR4 | 2013–2019 |
| Bromoform | 1.168 µg/L No EPA limit set
worst single sample: 1.18 µg/L | 2/9 | SYR4 | 2013–2019 |
| Chloroform | 2.3985 µg/L No EPA limit set
worst single sample: 2.49 µg/L | 2/9 | SYR4 | 2013–2019 |
| Dichloroacetic Acid | 3.51 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
| Fluoride | 460 µg/L 12% of the EPA limit 4000 µg/L | 1/2 | SYR4 | 2014–2017 |
| Selenium | 2 µg/L 4% of the EPA limit 50 µg/L | 1/2 | SYR4 | 2014–2017 |
| Total Haloacetic Acids (HAA5) | 5.43 µg/L 9% of the EPA limit 60 µg/L | 1/7 | SYR4 | 2013–2019 |
| Trichloroacetic Acid | 1.92 µg/L No EPA limit set | 1/7 | SYR4 | 2013–2019 |
35 contaminants tested, none detected
Utility contact
Frequently asked questions about Rockwood Park
Is Rockwood Park tap water safe to drink?
EPA monitoring detected 15 contaminants in Rockwood Park's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Rockwood Park's water?
EPA monitoring detected Lead, Copper, Nitrate, Lead, Dibromochloromethane, and others. The full list with the level and data source for each is above.
How many people does Rockwood Park serve?
Rockwood Park reports serving 200 people in Ohio, per its EPA record.
Has Rockwood Park had any water quality violations?
The EPA has 61 violations on file for Rockwood Park, of which 45 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.